|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-08-2021, 07:31 PM | #1 |
Junior Member
Join Date: Sep 2010
Location: Theodosia, Mo
Posts: 21
|
Clutch/Brake Pedal Assembly
Hi Guys, I need help. First time build. 36 roadster brake pedal hits frame when it returns. Don't think this is right. The brake arm only has a M3 on it. The clutch has 48-7520-A2. Are these the right arms? I sur would appreciate any hep you can give me. Thanks in advance
|
03-08-2021, 07:46 PM | #2 |
Senior Member
Join Date: May 2010
Location: (Not far enough...) Outside of DC
Posts: 3,387
|
Re: Clutch/Brake Pedal Assembly
Greetings Everyone. JAS1949 do you have the toe board installed? The clutch and brake pedal stop their upward movement somewhere near/resting on the rubber bumpers mounted under the 1936 drivers side toe board on my car.
__________________
-Jeff H Have you thought about supporting the Early Ford V-8 Foundation Museum? |
Sponsored Links (Register now to hide all advertisements) |
|
03-08-2021, 08:09 PM | #3 | |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
|
Re: Clutch/Brake Pedal Assembly
Quote:
|
|
03-08-2021, 08:23 PM | #4 |
Junior Member
Join Date: Sep 2010
Location: Theodosia, Mo
Posts: 21
|
Re: Clutch/Brake Pedal Assembly
Thanks Guys. No I dont have the toe board installed. Frame off restoration. Couldn't find any other number on brake ar. Bends slightly to left then goes straight. I'll try and post a picture tomorrow. Thanks for the info,
|
03-08-2021, 08:30 PM | #5 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,567
|
Re: Clutch/Brake Pedal Assembly
i have found that laying a straight edge across the flat number pad on the transmission will give you a fairly close example of where the floor boards will end up once installed. good for mock up stuff
|
03-08-2021, 09:05 PM | #6 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,094
|
Re: Clutch/Brake Pedal Assembly
Sponsored Links (Register now to hide all advertisements)
|
03-08-2021, 11:16 PM | #7 |
Junior Member
Join Date: Sep 2010
Location: Theodosia, Mo
Posts: 21
|
Re: Clutch/Brake Pedal Assembly
Thanks David, I can only dream, that my 36 will look as good as yours. But I keep on plugging away.
|
03-09-2021, 06:43 AM | #8 |
Senior Member
Join Date: May 2010
Location: Shippensburg, pa.
Posts: 415
|
Re: Clutch/Brake Pedal Assembly
I believe that the " M " on the brake pedal is from the pedal manufacturer, Moore Drop Forging.
|
03-09-2021, 06:23 PM | #9 |
Senior Member
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,361
|
Re: Clutch/Brake Pedal Assembly
1936 Ford Deluxe Phaeton - absolute perfection. Thanks David for sharing. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|