|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-01-2013, 08:43 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 295
|
Cleaning Gray Pot Metal Carburetor
I need to clean inside and out several "Gray Pot Metal M/S Carburetors". What can I use that will not stain or permanently change the color of the gray metal? I would like to soak overnight since they are very dirty. I appreciate all info and advice.
Bill Lee/Virginia Peninsula |
11-01-2013, 08:58 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 1,987
|
Re: Cleaning Gray Pot Metal Carburetor
I drop mine in a gallon of carb cleaner, they come out pretty nice, you may need a small brush if the outer crud is thick.
|
11-01-2013, 08:59 PM | #4 |
Junior Member
Join Date: Aug 2013
Location: Vancouver Wa.
Posts: 23
|
Re: Cleaning Gray Pot Metal Carburetor
I use a ultrasonic cleaner from harborfreight with simple green 1/2 and distilled water 1/2 for all my small parts including carburetors. Can't say how it would do without the sonic cleaner but it's cheap stuff and harmless to the environment.
|
11-01-2013, 09:01 PM | #5 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: Cleaning Gray Pot Metal Carburetor
Acetone does a good job for me
|
11-01-2013, 10:23 PM | #6 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
Re: Cleaning Gray Pot Metal Carburetor
Sponsored Links (Register now to hide all advertisements)
|
11-01-2013, 10:53 PM | #7 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Cleaning Gray Pot Metal Carburetor
I use an old ultrasonic foot washer with TIDE & PURPLE aquarium gravel. Works good for bolts, washers, nuts, etc, also.
At garage sales I ask if they have a container of bolts, nuts, washers, screws, etc. After cleaning, you'd be surprised at the treasures you find! Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|