09-06-2013, 09:44 AM | #1 |
Member
Join Date: May 2013
Location: Rapid River, MI
Posts: 90
|
dash rail
I have a 30ccpu and the dash rail I have has 5 screw holes and the metal on the truck only has 4 holes, what do I have?? Dwight
|
09-06-2013, 09:52 AM | #2 |
Senior Member
Join Date: May 2010
Location: Tennessee
Posts: 445
|
Re: dash rail
What you have is something wrong with the interior rail on the truck, I think. There is one screw in the center and two on either side...total 5.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-06-2013, 10:00 AM | #3 |
Member
Join Date: May 2013
Location: Rapid River, MI
Posts: 90
|
Re: dash rail
That is what I have on the rail and all the screw holes line up. I also have two small holes in the center about 3" apart??? I can drill a hole in the body so that I can put the center screw in maybe.
|
09-06-2013, 12:28 PM | #4 |
Junior Member
Join Date: Aug 2013
Location: Vancouver Wa.
Posts: 23
|
Re: dash rail
Could it be you have a passenger car rail and the center hole is for mounting the instrument panel light?
|
09-06-2013, 01:13 PM | #5 |
Senior Member
Join Date: May 2010
Location: New Jersey
Posts: 206
|
Re: dash rail
The length of a Slant window dash is the same as the rest, it is the width of the indentation that is different, it is wider.
|
09-06-2013, 04:27 PM | #6 |
Member
Join Date: May 2013
Location: Rapid River, MI
Posts: 90
|
Re: dash rail
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|