Go Back   The Ford Barn > General Discussion > Model T (1909-1927)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-02-2016, 03:44 PM   #1
firechief5215
Senior Member
 
firechief5215's Avatar
 
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
Default Help with grease seal

I pulled my worm drive rear apart and I have found a felt grease seal that is damaged..This is a model a but it is a early 28 late February. It is the same as the tt rear Does anyone have a part number or know who may have 2 of these felt seal or even a replacement See attached pictures red arrow shows seal and other picture is my seal Thank You
Attached Images
File Type: jpg felt.jpg (184.1 KB, 30 views)
File Type: jpg MODEL%20TT%20AXLE.jpg (101.1 KB, 56 views)
firechief5215 is offline   Reply With Quote
Old 04-02-2016, 04:22 PM   #2
Dodge
Senior Member
 
Join Date: Nov 2011
Location: Sonoma, CA.
Posts: 1,491
Default Re: Help with grease seal

If you have a good bearing house near you or a good tractor place, take a measurement
of the housing I.D. and the Axle O.D. and the thickness of the seal and see if they can
come up with a modern replacement seal.
Sometimes you get lucky. (and sometimes you find a seal)
Dodge is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 04-02-2016, 05:31 PM   #3
1937pickup
Senior Member
 
Join Date: Jul 2012
Posts: 586
Default Re: Help with grease seal

Does it have a part number on it? Most seals are marked with a manufacture's number. If you find that a little sleuthing should allow you find them.
1937pickup is offline   Reply With Quote
Old 04-02-2016, 06:32 PM   #4
firechief5215
Senior Member
 
firechief5215's Avatar
 
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
Default Re: Help with grease seal

The only markings I can find Is the ford script
firechief5215 is offline   Reply With Quote
Old 04-02-2016, 08:41 PM   #5
Farmallcub49
Senior Member
 
Farmallcub49's Avatar
 
Join Date: Jan 2011
Location: St Joseph,MN
Posts: 278
Default Re: Help with grease seal

This is the seal # 16303SA-H
__________________
'OSO HANDY RESTORATIONS
Specializing in Model T Fords
320-293-1953
Farmallcub49 is offline   Reply With Quote
Old 04-03-2016, 01:30 PM   #6
firechief5215
Senior Member
 
firechief5215's Avatar
 
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
Default Re: Help with grease seal

Sponsored Links (Register now to hide all advertisements)
Would you have a couple of the seals 4 sale or know where I could get them Thank you for your reply
firechief5215 is offline   Reply With Quote
Old 04-03-2016, 10:43 PM   #7
Farmallcub49
Senior Member
 
Farmallcub49's Avatar
 
Join Date: Jan 2011
Location: St Joseph,MN
Posts: 278
Default Re: Help with grease seal

I have them in stock. alosoatq.com change at to the @
__________________
'OSO HANDY RESTORATIONS
Specializing in Model T Fords
320-293-1953
Farmallcub49 is offline   Reply With Quote
Old 04-09-2016, 03:25 PM   #8
firechief5215
Senior Member
 
firechief5215's Avatar
 
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
Default Re: Help with grease seal

Got my seals today Thank you Which way does in go in. Does the open side of the seal go toward the pinion or away from the pinion
firechief5215 is offline   Reply With Quote
Old 04-09-2016, 07:58 PM   #9
firechief5215
Senior Member
 
firechief5215's Avatar
 
Join Date: Aug 2012
Location: Houston Delaware
Posts: 202
Default Re: Help with grease seal

'OSO HANDY RESTORATIONS Thank you for the phone call . That was a great experience buying from you Fast shipping and great to talk to Thank you Billy
firechief5215 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:21 AM.