|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-28-2014, 09:35 PM | #1 |
Senior Member
Join Date: Sep 2013
Location: Webb City, Missouri
Posts: 349
|
Coil Stand bracket
Hey all,
I am looking for a good coil stand / bracket for a 47 Flathead V8 and hoping someone may possibly have one off a bad flatty. It's the flat bracket that has 2 holes at the bottom that bolts to the intake, that the coil mounts onto. One of the 2 holes on mine is broken / gone! So, it's only holding by one bolt. Thanks!! Kevin
__________________
"Failure is simply the opportunity to begin again, this time more intelligently". Henry Ford. |
07-28-2014, 09:53 PM | #2 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Coil Stand bracket
I'm thinking someone repros that bracket but I can't remember where I may have seen that. Maybe MAC's, Drake, or Seedway?? If you can't find one, I believe I may have an extra.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
Sponsored Links (Register now to hide all advertisements) |
|
07-29-2014, 07:49 AM | #3 |
Senior Member
Join Date: Sep 2013
Location: Webb City, Missouri
Posts: 349
|
Re: Coil Stand bracket
Good morning John. What I am talking about would have came on the engine from the factory. It bolts to the intake manifold with 2 bolts, and widens out at the top so the original type coil could be attached with 2 bolts.
I may have to make one but it would sure be nice to just find a good original one. Thanks! Kevin
__________________
"Failure is simply the opportunity to begin again, this time more intelligently". Henry Ford. |
07-29-2014, 08:39 AM | #4 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Coil Stand bracket
Would a 48 truck have the same style of bracket?
|
07-29-2014, 08:44 AM | #5 |
Senior Member
Join Date: May 2010
Location: Lithia, FL
Posts: 1,050
|
Re: Coil Stand bracket
Kevin, pm sent. Steve
__________________
If it aint broke, don't fix it! |
07-29-2014, 08:41 PM | #6 |
Senior Member
Join Date: Sep 2013
Location: Webb City, Missouri
Posts: 349
|
Re: Coil Stand bracket
Sponsored Links (Register now to hide all advertisements)
Thanks Steve!! Kevin
__________________
"Failure is simply the opportunity to begin again, this time more intelligently". Henry Ford. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|