The Ford Barn

moonshine runner · 09-28-2013, 06:23 PM

Hey guys,

I'm going to order new door seals and replace them on my 47 Super Deluxe. The PO had installed some kind of crappy weather stripping along the door opening on the car body itself but my question is, does the seal go on the door or the car body?

Thanks in advance !

moonshine runner · 09-30-2013, 08:36 PM

Anyone?

Old Henry · 09-30-2013, 08:44 PM

On the door edge except at the edge of the floor where the seal fits inside of a holder there. The seals should come with diagrams and instructions depending on where you get them from. Click on each of the pictures on this page of C&G to see the different kinds you need and how and where they go. http://cgfordparts.com/ufolder/cgcat...s&searchnumber=

Their kit number 11A-7020530-S has everything you need for your tudor and I believe comes with diagrams and instructions. Call them to see if it does. That's where I got mine some years ago.

The seals may come with peal and stick on the back but it doesn't hold very long. Best to get the 3M seal adhesive listed to get them to stay.

felix37 · 09-30-2013, 09:11 PM

You can also check out Steele rubber.

Ken Crans · 09-30-2013, 09:16 PM

Don't forget to use masking tape in places to hold seal while glue is drying.

moonshine runner · 09-30-2013, 09:55 PM

Sponsored Links (Register now to hide all advertisements)

Thanks very much all! I am getting the seals from Macs Ford.

fjz · 03-02-2019, 04:55 PM

Have a kit from C&G for my 48. Kit consists of 5 packages. Front seal instructions show it glued to door from top of hinge down. Top seal show it glued to the body. No instructions where included for the back or bottom edges or the little L pieces. I have e-mailed C&G and am waiting for a reply. Looking for help from a fellow 48 owner.

19Fordy · 03-02-2019, 05:39 PM

Here's some L-Shaped info from DRAKE catalog of the 1970's.

fjz · 03-02-2019, 05:55 PM

Thanks 199Fordy. Those instructions tell me where the L's go.

09-28-2013, 06:23 PM	#1
moonshine runner Senior Member Join Date: Sep 2013 Location: Webb City, Missouri Posts: 349	Door Seal Installation Hey guys, I'm going to order new door seals and replace them on my 47 Super Deluxe. The PO had installed some kind of crappy weather stripping along the door opening on the car body itself but my question is, does the seal go on the door or the car body? Thanks in advance !

09-30-2013, 08:36 PM	#2
moonshine runner Senior Member Join Date: Sep 2013 Location: Webb City, Missouri Posts: 349	Re: Door Seal Installation Anyone?

09-30-2013, 08:44 PM	#3
Old Henry Senior Member Join Date: Oct 2010 Location: Orem, Utah Posts: 5,762	Re: Door Seal Installation On the door edge except at the edge of the floor where the seal fits inside of a holder there. The seals should come with diagrams and instructions depending on where you get them from. Click on each of the pictures on this page of C&G to see the different kinds you need and how and where they go. http://cgfordparts.com/ufolder/cgcat...s&searchnumber= Their kit number 11A-7020530-S has everything you need for your tudor and I believe comes with diagrams and instructions. Call them to see if it does. That's where I got mine some years ago. The seals may come with peal and stick on the back but it doesn't hold very long. Best to get the 3M seal adhesive listed to get them to stay. __________________ Prof. Henry (The Roaming Gnome) "It is good to have an end to journey toward; but it is the journey that matters, in the end.” Ursula K. Le Guin in The Left Hand of Darkness Last edited by Old Henry; 09-30-2013 at 10:52 PM.*

09-30-2013, 09:11 PM	#4
felix37 Senior Member Join Date: Oct 2010 Location: Chattanooga, TN Posts: 1,093	Re: Door Seal Installation You can also check out Steele rubber.

09-30-2013, 09:16 PM	#5
Ken Crans Senior Member Join Date: May 2010 Location: Highland,MI Posts: 1,196	Re: Door Seal Installation Don't forget to use masking tape in places to hold seal while glue is drying.

09-30-2013, 09:55 PM	#6
moonshine runner Senior Member Join Date: Sep 2013 Location: Webb City, Missouri Posts: 349	Re: Door Seal Installation Sponsored Links (Register now to hide all advertisements) Thanks very much all! I am getting the seals from Macs Ford.

03-02-2019, 04:55 PM	#7
fjz Member Join Date: Jul 2017 Location: Belleville, Ontario Posts: 90	Re: Door Seal Installation Have a kit from C&G for my 48. Kit consists of 5 packages. Front seal instructions show it glued to door from top of hinge down. Top seal show it glued to the body. No instructions where included for the back or bottom edges or the little L pieces. I have e-mailed C&G and am waiting for a reply. Looking for help from a fellow 48 owner.

03-02-2019, 05:55 PM	#9
fjz Member Join Date: Jul 2017 Location: Belleville, Ontario Posts: 90	Re: Door Seal Installation Thanks 199Fordy. Those instructions tell me where the L's go.