Mallory repl cap & rotor

[Charlie ny]

This comes up from time to time so here goes.....Napa has a one piece cap
and a rotor to replace the 2 piece Mallory cap and rotor...
CAP NAPA# MA9
ROTOR NAPA # MA7
Interesting both made in Germany...the cap is heavy dark brown or black
bakelite or hard plastic ( not sure) and brass everything else. My NAPA sources these from their big warehouse in Virginia. Hard to explain but the cap
has a good 'look'.
Charlie by

[1948F-1Pickup]

Wow, for a $103 those pretty much better cook dinner for me as well.....

[sidevalve8ba]

And make the bed!

[Bored&Stroked]

Well, try to find a new/NOS original two-piece cap system and rotor . . . you'll feed the whole family for the price.

[Shoebox]

Originally Posted by Bored&Stroked

Well, try to find a new/NOS original two-piece cap system and rotor . . . you'll feed the whole family for the price.

As a lover of flat top Mallories,.......... SO TRUE!

[Charlie ny]

Sponsored Links (Register now to hide all advertisements)

Guys,
I will tell you the cap is a 'handsome' piece, those nine nipples flow into the body so smooth ...uh oh...
Charlie ny

[V8COOPMAN]

Originally Posted by Charlie ny

Guys,
I will tell you the cap is a 'handsome' piece, those nine nipples flow into the body so smooth ...uh oh...
Charlie ny

This it? NIPPIE, NIPPIES, NIPPLES! DD

[Bored&Stroked]

Dang you Charlie . . . I'm stuck out at the family ranch in South Dakota . . . did you just have to elaborate on the nipples . . . well did yah???

[KiWinUS]

EASYYYYYYYY Dale. He’s talking farm work. Greasing Al the equipment prior to work season. “Grease Nipples”.

[Automotive Stud]

Part of the appeal is the design of the two piece cap. How about replacement points for the old flat caps? Now that's something I'd be interested in having the new part numbers for.

[Bored&Stroked]

Originally Posted by KiWinUS

EASYYYYYYYY Dale. He’s talking farm work. Greasing Al the equipment prior to work season. “Grease Nipples”.

Whew Tony . . . that helped my dire situation . . . I feel a lot better now! LOL

[tubman]

Originally Posted by Automotive Stud

Part of the appeal is the design of the two piece cap. How about replacement points for the old flat caps? Now that's something I'd be interested in having the new part numbers for.

I've done some work on this and have found replacements for a couple of common Mallory numbers. Unfortunately, all of my information is back in Minnesota and I don't currently have access to it. It is posted on the H.A.M.B. somewhere, and I seem to remember that the 8BA Mallory's run the same points as the stock 8BA distributors. Don't quote me on that, though. I should be easy enough to check.