|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-04-2021, 08:41 PM | #1 |
Senior Member
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 985
|
Lightened Flywheel?
What is the recommended weight for a lightened Model A flywheel?
What is the weight of a stock A flywheel?
__________________
Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria |
02-04-2021, 08:48 PM | #2 |
Senior Member
Join Date: Jul 2015
Location: SouthWest Michigan
Posts: 363
|
Re: Lightened Flywheel?
Stock flywheel is 63
I've got mine down to 37 What's a perfect weight? I guess that would depend on engine and what would work best for your application Sent from my iPhone using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
02-04-2021, 10:27 PM | #3 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Lightened Flywheel?
I run a stock b flywheel with a stock a crank...b fly is 53lbs
|
02-05-2021, 08:03 AM | #4 |
Senior Member
Join Date: Jan 2016
Posts: 2,097
|
Re: Lightened Flywheel?
I have a v8 clutch and the flywheel is about 35 lbs.
I am not saying that is the best, it is just what I have. |
02-05-2021, 08:26 AM | #5 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,509
|
Re: Lightened Flywheel?
Quote:
. . |
|
02-05-2021, 08:59 AM | #6 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,897
|
Re: Lightened Flywheel?
Sponsored Links (Register now to hide all advertisements)
Using a lightened flywheel is a matter of personal preference. How fast do you want to accelerate from a stop light? A lightened flywheel wont make any difference in how fast you can pull a hill. It will add more torsional vibration that will feed into the transmission and that I believe I can sense.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
02-05-2021, 08:59 AM | #7 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Lightened Flywheel?
I reduced the rotating group weight by 10 lbs with the B flywheel,added about 4 with the harmonic balancer. A flywheel stores kinetic energy and by virtue of its mass dampens impulse.
In my opinion it has to do with your vision of the car.I want the mass to aide driveability,smoother operation. Although I basically double the power output of the engine through modification I don't race.My goal is a long distance touring car with reliability,I dont need a jack rabbit off the line,but want the smooth pulling power.In traffic the kinetic energy stored yields smoother clutch operation and smooth acceleration. |
02-05-2021, 09:16 AM | #8 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Lightened Flywheel?
Whats important is building the engine for what you plan to do with it. I know folks who invest thousands to build an engine capable of racing and drive it like a touring car.
Another thing to consider is vendors run a business and sell items for profit. Its not fully in their interest to be sure a modification they sell fits your needs. Social media forums is an area where you need to filter based on your goals for the car. Often trends become established based not on need,but on a group justifying the money they spent. |
02-05-2021, 11:52 AM | #9 |
Senior Member
Join Date: May 2020
Location: Corning NY
Posts: 244
|
Re: Lightened Flywheel?
I do know that lightening the flywheel will change the torsional response of the drive line. The natural frequency will increase. But where the weight is removed is also important. I would want a technical reason, experience or expected positive changes that will result from lightening the flywheel alone. It would seem that counterweighting the crankshaft would be better in terms of vibration that occurs at about 42 mph. But again, before I would make this change, I would want to know what it gets me....vibration free engine, improved bearing life...what?
|
02-05-2021, 10:06 PM | #10 |
Senior Member
Join Date: Feb 2015
Location: Australia
Posts: 1,969
|
Re: Lightened Flywheel?
With no flywheel, when you put pedal to the metal (or wood) the energy goes to the back wheels to make you go.
With a flywheel some, or a lot, depending on weight, gets stored for later. This saved energy transfers to the wheels when you try to slow down or are slowed down, whether you like it or not. |
02-05-2021, 10:55 PM | #11 |
Senior Member
Join Date: May 2010
Location: midlothian illinois
Posts: 447
|
Re: Lightened Flywheel?
I'm not sure that all will be able to relate to this answer, but where the weight is in relation to the outer diameter of the flywheel, actually does affect the speed and performance.
Look at a figure skater and watch as they begin to make a spin in their vertical axis; their arms are stretched out, and as they bring their arms in closer to the center line / axis of their body, their speed dramatically increases to a point of disbelief ! The weight never changed, just its location in the rotation. Without destroying the structure and strength of the flywheel, removing the weight from the outer diameter from both sides, should help in the acceleration of the motor. I'm sure your rear main bearing will thank you for the gesture too. |
02-06-2021, 12:13 AM | #12 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Lightened Flywheel?
OK, What is the weight of a standard flywheel with pressure plate and ring gear attached?. Mine comes in at about 70 pounds.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
02-06-2021, 08:16 AM | #13 |
Senior Member
Join Date: May 2011
Location: Elyria, Ohio
Posts: 755
|
Re: Lightened Flywheel?
I'm no expert, but Les Andrews says "The stock flywheel weighs 63 lbs. 4 oz. Do not drop it. Keep feet clear when lifting the flywheel into place. Feet do not mesh well with the flywheel ring gear." I can verify that this is true. Don't ask me how I know.
Marty |
02-06-2021, 11:30 AM | #14 |
Senior Member
Join Date: Dec 2014
Location: Santa Maria, CA
Posts: 985
|
Re: Lightened Flywheel?
Many thanks to all who responded!
__________________
Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria |
02-11-2021, 11:48 PM | #15 |
Senior Member
Join Date: May 2010
Location: South California
Posts: 6,188
|
Re: Lightened Flywheel?
|
02-12-2021, 10:05 AM | #16 | |
Senior Member
Join Date: May 2010
Location: Bucks Co, Pa
Posts: 3,740
|
Re: Lightened Flywheel?
Quote:
Terry |
|
02-12-2021, 01:39 PM | #17 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,075
|
Re: Lightened Flywheel?
I have heard that one of the rationales for removing the perimeter of the back of the flywheel (thereby lightening it) was to allow the three-finger V8 clutch to fit. Is there truth in that, or will the V8 clutch fit within the depression in the stock flywheel? If not, how much do you need to increase the diameter of the depression to make it fit?
The thread that Brent mentions in #5 is a very interesting read. Lots of opinions, most well-supported. I'm coming up on building a touring engine with 6.0 head, and I'm leaning more towards lightening only as much as I need to for a V8 clutch to fit. I'm not so interested in speed of spin-up as I am in a smooth low speed idle and maintaining inertia while climbing. JayJay
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan Last edited by JayJay; 02-12-2021 at 04:52 PM. |
02-12-2021, 02:17 PM | #18 |
Senior Member
Join Date: Jan 2015
Location: San Jose California
Posts: 150
|
Re: Lightened Flywheel?
This like discussing oil. It never seems to end.
|
02-12-2021, 02:31 PM | #19 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
Re: Lightened Flywheel?
With my lack of knowledge of engines my question is what is accomplished by lightening the flywheel? Is it done in a machine shop ? Thanks in advance !
|
02-12-2021, 04:47 PM | #20 |
Senior Member
Join Date: Jan 2016
Posts: 2,097
|
Re: Lightened Flywheel?
yes it is a machine shop that will do the flywheel.
With a lightened flywheel the car spools up much faster because it isn't trying to move an additional 35 lbs. Take offs at a light are much quicker. On my car I have the lightened flywheel along with a V8 clutch. The v8 clutch makes it way easier to depress the clutch. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|