|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-24-2012, 02:29 PM | #1 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
Blueprint Patterns
Are there any blueprint patterns availble online to download for cowl panels,door panels or side panels for the 1930 std. coupe and rumble seats????
Thanks, Tom |
06-24-2012, 03:06 PM | #2 |
Senior Member
Join Date: Jun 2012
Posts: 559
|
Re: Blueprint Patterns
- oops, misread the original post. Sorry. -
__________________
1928 Model A Business Coupe Rebuild picture gallery here The light at the end of the tunnel has been turned off due to budget cuts. Last edited by 28ACoupe; 06-27-2012 at 04:13 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
06-24-2012, 06:05 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 3,099
|
Re: Blueprint Patterns
My interpretation of the question is that you are looking for patterns for interior trim panels. If that is the case the answer is no.
__________________
http://www.abarnyard.com/ |
06-25-2012, 07:22 PM | #4 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
Re: Blueprint Patterns
yes...the interior is what I was looking for. Thanks to all, Tom
|
06-25-2012, 07:46 PM | #5 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,985
|
Re: Blueprint Patterns
I've traced them out from originals in the past.Now,I buy the pre-cut unfinished panels from LB. On an open pickup the price between pre-cut and raw panel board was $7.by the time I was through with oversize shipping for raw panel board.
|
06-26-2012, 06:39 PM | #6 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
Re: Blueprint Patterns
Sponsored Links (Register now to hide all advertisements)
|
06-27-2012, 01:29 AM | #7 |
Registered User
Join Date: May 2010
Location: Sacramento Ca
Posts: 1,179
|
Re: Blueprint Patterns
well if they arnt availible ,lets make them availible
Jim ,Vince ,you can put it on your sites this is for 30 tudors ,and coupes,pickups,stationwagons and sedans tom moniz its missing a few dimensions ,its just too big for my scanner at the top the 11 3/8 is the total of all the smaller dimensions 2 3/8+ 2 3/4 +2+2+2 and the overall height of 17 13/16 plus the left upper 5 1/4 of welting that extends off the top of the scan |
04-27-2020, 11:41 PM | #8 |
Junior Member
Join Date: Jul 2013
Posts: 1
|
Re: Blueprint Patterns
Hey any chance you can rescan possibly in 2 diagrams and relist all dimensions, previous scan most dimensions unreadable! also if door patterns for 30-31 coupe are available. Thanks.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|