The Ford Barn

Jeff/Illinois · 05-01-2012, 11:05 AM

===

Vanspeed · 05-01-2012, 04:02 PM

I use a magnet, it will still stick to 1/16 inch filler but you can tell by how it sticks how much filler there is. If there is heavy bondo, the magnet should fall right off.

Aerocraft · 05-01-2012, 05:28 PM

Sponsored Links (Register now to hide all advertisements)

I use a piece of the plastic "refrigerator" magnets. They are so weak that the slide right off even a skim layer of filler. Gar Williams

05-01-2012, 11:05 AM	#1
Jeff/Illinois Senior Member Join Date: May 2010 Posts: 2,799	Body Paint-Filler Detectors === Last edited by Jeff/Illinois; 12-11-2012 at 08:12 PM.

05-01-2012, 04:02 PM	#2
Vanspeed Senior Member Join Date: May 2010 Location: Suttons Bay, Mich. Posts: 3,392	Re: Body Paint-Filler Detectors I use a magnet, it will still stick to 1/16 inch filler but you can tell by how it sticks how much filler there is. If there is heavy bondo, the magnet should fall right off. __________________ *Respecting and Resurrecting Ford Model A's.*

05-01-2012, 05:28 PM	#3
Aerocraft Senior Member Join Date: May 2010 Location: Naperville, IL Posts: 1,387	Re: Body Paint-Filler Detectors Sponsored Links (Register now to hide all advertisements) I use a piece of the plastic "refrigerator" magnets. They are so weak that the slide right off even a skim layer of filler. Gar Williams