|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-06-2017, 03:32 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 239
|
32 5-window rear window questions
Had the package tray and window mechanism apart for several years for repairs and paint. Does the two wood vertical stanchions have two sheet metal channels that holds the window runs in place? It seems mine did when disassembled but have lost. If there is supposed to be a metal channel for each vertical stanchion, does anyone have dimensions and a picture of how it is located?
Also, it seems. there was a rubber channel piece attached to the body on a piece of metal running the length of the window opening below the window opening. If so, does anyone have a picture and the type of rubber I need to look for? |
02-06-2017, 03:45 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 4,751
|
Re: 32 5-window rear window questions
They are wide enough for the felt channel and not quite as tall so they do not touch the glass. About 4" long. Rubber channel at the top for sealing. There may be a rubber wedge shaped rubber block that prevents the regulator arm from touching wood or metal, mounted to the front wood panel. Plus a rubber block in the drain trough so the regulator does not touch metal there.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-06-2017, 04:02 PM | #3 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 32 5-window rear window questions
And the lipped rubber channel that goes between the glass and the horizontal steel channel, the same as with the door glass. There's nothing in the way of weather stripping on the body beneath the window opening.
|
02-06-2017, 09:23 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 239
|
Re: 32 5-window rear window questions
Does anyone repo the metal channel?
|
02-07-2017, 11:36 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 239
|
Re: 32 5-window rear window questions
Thanks Terry and Dave
|
02-07-2017, 05:24 PM | #6 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 32 5-window rear window questions
Sponsored Links (Register now to hide all advertisements)
|
02-07-2017, 06:10 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 239
|
Re: 32 5-window rear window questions
Dave I'm looking for the sheet metal channel like the first picture Terry posted
|
02-07-2017, 10:23 PM | #8 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,101
|
Re: 32 5-window rear window questions
Given that they make complete bodies, I suspect that they offer the vertical channels as well.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|