10-28-2016, 03:55 PM | #1 |
Member
Join Date: Mar 2011
Posts: 91
|
Generator belt
I am putting a 59ab flathead in a 34 ford coupe. Does anyone have a part number for a generator belt that will work for my set up? I am running a thickstun high rise manifold and the 59ab generator with a earlier style pulley so I can still run the fan off the pulley.
|
10-29-2016, 05:59 AM | #2 |
Senior Member
Join Date: May 2010
Posts: 642
|
Re: Generator belt
Try a Gates "B 54" kx
|
Sponsored Links (Register now to hide all advertisements) |
|
10-29-2016, 06:28 AM | #3 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,752
|
Re: Generator belt
I use a B53 belt on my roadster. The B denotes the width of the belt, the 53 is the nominal length in inches. The designation is generic, by which I mean any manufacturer's B53 or as Kerk is using, a B54 belt should work. you don't necessarily need a Gates belt. Any industrial supply (bearings, belts, pulleys etc) should be able to supply a B53 or B54 belt. You don't necessarily need an automotive supply place or a specific part number.
Mart. |
10-29-2016, 12:31 PM | #4 |
Member
Join Date: Mar 2011
Posts: 91
|
Re: Generator belt
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|