Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-28-2013, 11:11 PM   #1
tbirdtbird
BANNED
 
Join Date: May 2012
Location: inside your RAM
Posts: 3,134
Default Success with improvements for touring

OK, first off I am in this for all the touring I can get.
__________________
'31 180A

Last edited by tbirdtbird; 12-06-2015 at 01:51 AM.
tbirdtbird is offline   Reply With Quote
Old 07-28-2013, 11:19 PM   #2
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
Default Re: Success with improvements for touring

I am glad you are happy with your Model-A experiences. Your comments do pose an interesting thought to me though, ....how is it that Model-A's were capable for touring successfully all these years, and all these miles without a set of tube shocks, an electronic ignition system, and a Mitchell overdrive?
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-28-2013, 11:56 PM   #3
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: Success with improvements for touring

GEEZ! I feel REALLY COLD water frum somewhere????? Maybe my A.C. drain line plugged up again???
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Old 07-29-2013, 11:01 AM   #4
Gyrodoc
Senior Member
 
Gyrodoc's Avatar
 
Join Date: May 2011
Location: Ontario California
Posts: 104
Default Re: Success with improvements for touring

I like hearing both sides. You're both right.

Gyrodoc is offline   Reply With Quote
Old 07-29-2013, 11:18 AM   #5
Duffy1
Senior Member
 
Join Date: May 2012
Location: Mo. City , Texas
Posts: 725
Default Re: Success with improvements for touring

tbirdtbird ;

You left out your A/C by Ken Davis . Hard to argue against an A/C especially when living in Texas and it is the Bosses prerequest to going on tours . If mama`s not happy nobodys happy. Glad you are happy with your set up. Diversity in Model A ( from no mods to a lot of mods ) is what makes this hobby interesting . Keep touring and posting .
Duffy1 is offline   Reply With Quote
Old 07-29-2013, 12:54 PM   #6
H. L. Chauvin
Senior Member
 
Join Date: May 2010
Posts: 4,179
Default Re: Success with improvements for touring

Sponsored Links (Register now to hide all advertisements)
On a more serious note, with nothing but sincere respect for the gentlemen replying to "Touring Improvements", this particular discussion could be published in a book for both experienced Model A owners & for newbies who just bought A Model A, to illustrate the differences in restoration opinions that we "all" share.

The comical replies should be left in to add interest.

With a few suggestions from "all" Ford - Barners brave enough to offer an opinion, we could throw in a few more likes, dislikes, pet peeves, etc.

Some other topics could be: white-wall tires, detergent oil, cut-off switches on positive & negative battery leads, & what ever.

This publication could be eloquently presented with humor, & could be both educational & professionally amusing for all Model A owners.
H. L. Chauvin is offline   Reply With Quote
Old 07-29-2013, 01:13 PM   #7
Rock Hornbuckle
Senior Member
 
Rock Hornbuckle's Avatar
 
Join Date: Mar 2011
Location: Noxon Montana
Posts: 532
Default Re: Success with improvements for touring

Blackwalls, whitewalls, skinny girlfriends, fat girlfriends, it's all a matter of preference. Enjoy whatever you have.
__________________
'31 Fordor Deluxe 2W Briggs 170-B / blackwalls
'41 Fordor Deluxe / 2-duece flattie
'66 1/2 Dodge Charger
'14 100th Anniversary Challenger Limited Edition.

Semper Fidelis
Rock Hornbuckle is offline   Reply With Quote
Old 07-29-2013, 02:15 PM   #8
BILL WILLIAMSON
Senior Member
 
BILL WILLIAMSON's Avatar
 
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
Default Re: Success with improvements for touring

So, if one has ANYTHING non-original that violates the MARC or MAFCA mission statement, should we not be allowed as a member???
My '30 Coupe, Minerva, was highly modified & very dependable & was a pleasure to drive. My '29 Coupe, Vermin is almost completely "bone stock" & will be a new driving experience & will be very dependable also.
I can imagine Henry Ford saying, "Well, folks, I've built you a TUFF, DEPENDABLE, car, so go & accessorize it to suit yourselves, we even offer GENUINE FORD ACCESSORIES to help you, jist DON'T buy them "GYP" parts out there"!
As for "US" reaching a "CONCENSUS" on this subject, it has my Dog laughin' uncontrollabley & rollin' in the floor!! Bill W.
Attached Images
File Type: jpg VERMIN.jpg (94.4 KB, 100 views)
File Type: jpg MINERVA CC.jpg (97.1 KB, 127 views)
__________________
"THE ASSISTANT GURU OF STUFF"
BILL WILLIAMSON is offline   Reply With Quote
Old 07-29-2013, 02:20 PM   #9
Jordan
Senior Member
 
Jordan's Avatar
 
Join Date: May 2010
Location: Ft. Worth
Posts: 1,006
Default Re: Success with improvements for touring

Quote:
Originally Posted by tbirdtbird View Post
OK, first off I am in this for all the touring I can get. So if you don't like what I have done, simply put, don't do it. This post is for the benefit of those who have considered these changes for their car but weren't sure about them. And, the Dallas club has a bunch of excellent tours every yr.

1. Ken's modern rear shocks WoW the car doesn't hop all over the road any more!
And we do have our share of bad roads around here.

2. FSI electronic ignition. WOW I was told it would seem like I had a counter-balanced crank (which I don't), and it is even better than that ! The engine runs so smoothly it is beyond description. So I am thrilled and I am sure my babbitt is happier, too. And, I used to have a nasty harmonic at 50-55 mph but that is totally gone now. Despite what the instructions say, full advance has kicked in by 1600.

3. Mitchell OD. Holy crap this is excellent! I threw on a tach and was turning 1900 at 60 and 2200 at 70; and it was smooth as could be. I will never see 70 on an actual tour; but I can now be on those stretches of Interstate that can't be avoided and not be a hazard to myself and others. And at lower speeds there will be less wear on the engine. In fact, with my 3.78 gearset I can drive around town in Mitchell high with ease, even off the line at lights.

I had a 3.54 in there before but it cannot compare this Mitchell setup.

4. I thank Tom Endy for exquisite instructions on setting up an A gearset, way better than the Schild book I used 20 yrs ago. Not a peep from the rear and needed no shims at all on the tapers; it is solid back there.

This all boils down to being easier on the car and easier on the driver.
I too have an overdrive, FSI Distributor and Ken's modern shocks (along with some other goodies). I have been very satisfied with this set up.
__________________
Cowtown A's
Jordan is offline   Reply With Quote
Old 07-29-2013, 04:09 PM   #10
Mike V. Florida
Senior Member
 
Mike V. Florida's Avatar
 
Join Date: May 2010
Location: South Florida
Posts: 14,054
Send a message via AIM to Mike V. Florida
Default Re: Success with improvements for touring

Quote:
Originally Posted by Jordan View Post
I too have an overdrive, FSI Distributor and Ken's modern shocks (along with some other goodies). I have been very satisfied with this set up.
That is a prefect statement!
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II
Mike V. Florida is offline   Reply With Quote
Old 07-29-2013, 03:12 PM   #11
amodel25
Senior Member
 
amodel25's Avatar
 
Join Date: May 2010
Location: Crowley, TX
Posts: 328
Default Re: Success with improvements for touring

I don't have any of it (except an oil filter and alternator) and I'm happy as a clam.

Old school is still cool.........


Talkin' about my '31 slant window, not my avatar
amodel25 is offline   Reply With Quote
Old 07-30-2013, 04:00 PM   #12
brum1
Senior Member
 
brum1's Avatar
 
Join Date: Nov 2010
Location: Raynham, Mass.
Posts: 583
Default Re: Success with improvements for touring

I personally strive for a completely authentic Model A but if someone wants to modify to suit their needs they would still be welcome in our local chapter and get along just fine
__________________
"no one knows more than everyone"

Last edited by brum1; 07-30-2013 at 07:36 PM.
brum1 is offline   Reply With Quote
Old 11-28-2015, 02:20 AM   #13
mike657894
Senior Member
 
mike657894's Avatar
 
Join Date: Oct 2015
Location: Bay City Michigan
Posts: 1,050
Default Re: Success with improvements for touring

some people just want to argue
. i like the points you made and are things I may consider. I do want to drive my car out of state and there seems to be stretches that you have to get on the freeway.
mike657894 is offline   Reply With Quote
Old 11-28-2015, 03:16 AM   #14
Dodge
Senior Member
 
Join Date: Nov 2011
Location: Sonoma, CA.
Posts: 1,491
Default Re: Success with improvements for touring

I have one of each...a completely stock one to enjoy as original and one all the goodies
on it. I like them both just two different rides for different types of driving...
Dodge is offline   Reply With Quote
Old 11-28-2015, 04:27 AM   #15
inex01
Senior Member
 
inex01's Avatar
 
Join Date: Dec 2010
Location: Rockville, Maryland
Posts: 350
Default Re: Success with improvements for touring

Quote:
Originally Posted by Dodge View Post
I have one of each...a completely stock one to enjoy as original and one all the goodies
on it. I like them both just two different rides for different types of driving...
Like you I have two cars, a totally stock #s matching 31 Roadster and a 31 Slant sedan that has a Touring Engine, Overdrive, Radial Tires, Cast Iron Drums, Pannard Bar and a couple of days ago installed electronic ignition. I really enjoy both cars.

When I sell the sedan it can always be brought back to original because I saved everything that I up-graded so no harm done, but in the meantime I have a car that is more enjoyable, comfortable and safe to drive in the current environment.
__________________
Chuck McDonald,
Member of AACA, Model A Club, NRA
inex01 is offline   Reply With Quote
Old 11-28-2015, 05:21 AM   #16
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,472
Default Re: Success with improvements for touring

As terrific as Model As were in their day, if they were to be produced today, they wouldn't be allowed on the road. I have had MANY miles of enjoyment out of a standard car and one modified for touring so I can see both sides of the story.
We have another long trip coming up in May next year of about 8 thousand miles, towing all the way. Think I will use the modified car.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 07-29-2013, 03:13 PM   #17
Duffy1
Senior Member
 
Join Date: May 2012
Location: Mo. City , Texas
Posts: 725
Default Re: Success with improvements for touring

I think some folks are confusing adding all these bolt ons with chop and channel ,etc,etc therefore assuming preservation of the Model A is not taking place . I have a 31 s/w with many many goodies ( set up for touring) which can be removed and the car is as stock as the day it rolled off the assembly line. As tbirdtbird stated if you are into touring you might be interested in my post if not, do not waste your time reading it.
Duffy1 is offline   Reply With Quote
Old 07-29-2013, 03:31 PM   #18
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: Success with improvements for touring

Quote:
Originally Posted by Duffy1 View Post
... I have a 31 ... with many many goodies ( set up for touring) which can be removed and the car is as stock as the day it rolled off the assembly line ...
That's the way mine is!
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 07-29-2013, 03:22 PM   #19
quickchange
Senior Member
 
quickchange's Avatar
 
Join Date: May 2010
Location: Nelson. New Zealand
Posts: 1,999
Default Re: Success with improvements for touring

So where do we find these 3.27 original ring & pinnion sets from ? I have had 56 Model A,s & non had 3.27 rears . Are these a MODERN UP GRADE like the tele shocks etc or did some A,s come out factory with them ?? IF not then this must be a modification too.
quickchange is offline   Reply With Quote
Old 07-29-2013, 04:39 PM   #20
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
Default Re: Success with improvements for touring

Quote:
Originally Posted by quickchange View Post
So where do we find these 3.27 original ring & pinnion sets from ? I have had 56 Model A,s & non had 3.27 rears . Are these a MODERN UP GRADE like the tele shocks etc or did some A,s come out factory with them ?? IF not then this must be a modification too.

This thread has been "twisted" WAY off-topic but going to back to the first comment, I believe the point was we should consider putting on tube shocks, an electronic ignition, and an overdrive because it is easier on the car & driver if we plan to tour with our Model-As.


To play Devil's Advocate with your question, can you walk up to any Model-A and at a glance tell what rear end gear ratio it has installed?
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:04 AM.