|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-27-2012, 05:51 PM | #1 |
Senior Member
Join Date: May 2010
Location: Walnut Grove, Mississippi
Posts: 605
|
Ford Pickup Wheels
ALL: Recently purchased a set of four WWW tires at a SUPER price, but they are 15" - I want to use them on my '51 PU, which currently has 16" wheels. Anyone know what other years of 15" wheels will fit the PU bolt pattern?? I want standard steelies - not chrome or otherwise........
__________________
WARM REGARDS, MARCUS |
12-27-2012, 06:18 PM | #2 | |
Senior Member
Join Date: May 2010
Location: Napier, New Zealand
Posts: 2,001
|
Re: Ford Pickup Wheels
Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
12-27-2012, 06:22 PM | #3 |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: Ford Pickup Wheels
Late 40's Mercury used a 15" wheel that will work, or more commonly Ford pickup wheels used the same hubcap up until 1965, so any 15" pickup wheel from the 50's or early 60's will work. There are 5", 5.5" and 6" wide wheels, so pay attention to that, so you don't end up with a mis-matched set.
Neal |
12-27-2012, 06:52 PM | #4 |
Junior Member
Join Date: Oct 2010
Location: Portersville, Pa. area
Posts: 10
|
Re: Ford Pickup Wheels
Hard to find now, but....57/8 Chrystler Imperial used a 15" wheel. The stock Ford hub caps snaps on by using early Plymouth hub caps clips, riveted on, but easily chiseled or ground off.
|
12-27-2012, 07:53 PM | #5 |
Senior Member
Join Date: May 2010
Location: Cottageville, WV
Posts: 1,535
|
Re: Ford Pickup Wheels
Marcus,
I am thinking like NealinCa. The later truck wheels were 15" and will fit. You can advertise on the Swap Meet or the HAMB and maybe find a set. New wheels are available too.
__________________
Son, you will never blow an engine up in high gear. |
12-27-2012, 08:34 PM | #6 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Ford Pickup Wheels
Sponsored Links (Register now to hide all advertisements)
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
12-27-2012, 08:58 PM | #7 |
Senior Member
Join Date: May 2010
Location: Odessa, FL
Posts: 7,611
|
Re: Ford Pickup Wheels
Marcus, depending on your choice of hub cap, you can run Econoline wheels up through the mid to late (I think) '60's.
__________________
Imagination is more important than knowledge. |
12-27-2012, 09:05 PM | #8 | |
Senior Member
Join Date: May 2010
Location: Gardiner Me.
Posts: 4,200
|
Re: Ford Pickup Wheels
Quote:
|
|
12-27-2012, 09:10 PM | #9 | |
Senior Member
Join Date: May 2010
Location: Gardiner Me.
Posts: 4,200
|
Re: Ford Pickup Wheels
Quote:
|
|
12-27-2012, 11:16 PM | #10 |
Senior Member
Join Date: May 2010
Location: Mn
Posts: 2,411
|
Re: Ford Pickup Wheels
'48 up through '65 Ford 1/2 ton's came with either 15's or 16's and they all have the
"innie" hubcap nubs, same as the '40 through '48 car style hubcap, and the '40-'65 1/2 ton hubcaps. '66 through '96 Ford 1/2 ton's have the correct bolt pattern, but they have the "outie" hubcap nubs, and take the more common 10 1/8 inch hubcaps. The '49 through '51 Merc wheels are unique, in that they have the correct bolt pattern to fit your pickup, but they are the Only years to have "outie" hubcap nubs that take an 11 inch hubcap. .
__________________
If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN |
12-28-2012, 01:05 AM | #11 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Ford Pickup Wheels
I'd drink to that Walt!!! LOL
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
12-28-2012, 08:42 AM | #12 |
Senior Member
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,265
|
Re: Ford Pickup Wheels
My '64 Econoline has 14" wheels.
|
12-28-2012, 12:38 PM | #13 |
Senior Member
Join Date: May 2010
Location: Walnut Grove, Mississippi
Posts: 605
|
Re: Ford Pickup Wheels
Wonderful!! Thanks All: This is exactly the information that I need to start my search - NOW, I just to pop the caps off the 16's to see if the type that JM 35 has will work - maybe a swap in the works?? I am almost positive that I have the narrow style that will work on his '35..........JM 35, give me a PM and we can talk about it: [email protected].
__________________
WARM REGARDS, MARCUS |
12-28-2012, 04:38 PM | #14 | |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Ford Pickup Wheels
Quote:
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
|
12-28-2012, 04:53 PM | #15 |
Senior Member
Join Date: Dec 2011
Location: NW North Carolina
Posts: 461
|
Re: Ford Pickup Wheels
2wd Ford pick thru 1978 will fit.
__________________
3 pedals, 3 gears, no valve-covers.. Now THAT is a hot rod !! https://www.youtube.com/watch?v=ZmwwB34vxJE |
01-02-2013, 06:42 PM | #16 |
Senior Member
Join Date: May 2010
Location: Walnut Grove, Mississippi
Posts: 605
|
Re: Ford Pickup Wheels
John - Mr. Fat Fingers Dummy (ME!!!) deleted your message when he THOUGHT that he was saving it......send it again, please!! I am definitely interested, just have to double check to see if I have the "innie" or "outie" hubcap nubs..........
__________________
WARM REGARDS, MARCUS |
01-02-2013, 09:36 PM | #17 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,035
|
Re: Ford Pickup Wheels
Marcus, your pickup has the "innie" caps.
|
01-02-2013, 09:48 PM | #18 |
Senior Member
Join Date: May 2010
Location: Mn
Posts: 2,411
|
Re: Ford Pickup Wheels
================================================== =========
Yes, if it has Original wheels, they will have the "innie" nubs. But, ya better give a visual check, as many have been changed to newer, or different wheels throughout the years. .
__________________
If mama ain't happy, ain't nobody happy. But if daddy ain't happy...RUN |
01-03-2013, 12:41 AM | #19 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Ford Pickup Wheels
Marcus, I sent that message using Fordbarn's email system which does not give me a saved copy. I'll try to remember what I said and send you another email or maybe a pm this time.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
01-03-2013, 08:51 AM | #20 |
Senior Member
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,265
|
Re: Ford Pickup Wheels
JM, my mother always said that if you always tell the truth, you won't need to worry about what you said. See you at the pizza party!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|