31 Slant window town sedan visors

[jack99]

Question. Did "sun visors" come a standard equipment on a 1931 Slant window Town Sedan (160B)? Or were they optional?

[Tom Wesenberg]

None on the outside, but mine has a pair on the inside.

[jack99]

Thanks, Tom I am refering to the inside visors. Are they available any place?

[Tom Wesenberg]

Originally Posted by jack99

Thanks, Tom I am refering to the inside visors. Are they available any place?

I found a good original pair on ebay about 7 years ago. Just perfect for my car, which I won't restore.

L/B sell repro's I think, but they cost more than I paid.

[ralph j lawrie]

I have an excellant pair of 31 visors that are used but no hardware for sale. Ralph

[DaveB]

Sponsored Links (Register now to hide all advertisements)

I need a pair of visors for my Victoria and Slant Sedan ........ but no one ... I can find... makes the hardware. Berts wanted to start making them again, but the guy who owns the "process" will not sell and either can't or won't start making them again. Good luck finding a complete pair. L.B. will re-cover them .... but they do not have the hardware.

[Herb Concord Ca]

When I restored my Slant T/S in 2010, I bought a pair from L-B.

[400A-64]

Through my survey replies...not all SW Sedans had TWO visors....several replies indicated that on some original cars there were only ONE and in later inspection of the passenger wood block,,,there NO holes for mounting. I suspect that there might have been a supply problem.
Bruce [email protected]

[Tom Wesenberg]

Originally Posted by 400A-64

Through my survey replies...not all SW Sedans had TWO visors....several replies indicated that on some original cars there were only ONE and in later inspection of the passenger wood block,,,there NO holes for mounting. I suspect that there might have been a supply problem.
Bruce [email protected]

I've read the same thing.
I wonder if the standard Fordor came with only one for the driver, while the more delux Fordors came with two sun visiors?

[Mike V. Florida]

LB used to have the brackets under part number RFP106B.

[Marco Tahtaras]

Originally Posted by Tom Wesenberg

I've read the same thing.
I wonder if the standard Fordor came with only one for the driver, while the more delux Fordors came with two sun visiors?

Here is a copy of what I posted 10-12 years ago:

The 160-B & C were announced March 2, 1931 and initial production at the Rouge followed within the week. The interior trim options were brown Bedford Cord and brown Mohair. They had a single fold down visor for the driver, pocket in the right cowl cardboard (similar to deluxe Roadster), and a large pocket with cover flap on the back of the front seat. There were NO pockets on the doors. In April the branches provided the dealers with the part numbers to special order the right visor if desired.

During May 1931 the interior was revised. Although not directly related (that I know of), the timing of the change closely corresponds with the change to the indented firewall. The new interior dropped the pockets on the right cowl and the rear of the front seat, replaced with pockets on all four doors, and made the right side visor standard. Although the brown mohair was continued, the bedford cord was replaced with textured (striped) tan broadcloth with artificial leather trim. This continued for the remainder of production.

[31ster]

I just bought a late 31 indented firewall standard slant window and it has the brackets for both visors.

[400A-64]

Tom... In responce to my survey, the 160-A none indicated 1 visor and 5 indicated 2 visors. while on the 160-B 3 indicated 1 visor and 16 replied with 2 visors. This is out of 43 survey returns. the rest either had no indication or replied with a zero to the question. Over the years I have sent over 200 surveys out both via e-mail and snail mail. I feel that an educated opinion could only be made after at least 100 replies. It is a struggle

[Tom Wesenberg]

It's very possible that my 31 S/W T/S with flat firewall came from the factory with only one inside visor. The car was parked since 1957 when I bought it, and someone had removed the visor from the driver's side and nailed 3 sides to it about 1 1/2" high. They then secured it to the passenger side to use as a map pocket, etc. in the same spot the visor would mount.

[John Stone]

My flat firewall Town Sedan (160B) has 2 visors. Front seat pocket, RH kick panel pocket and no center arm rest in back seat. Number is A4127XXX. Pretty early I think.

[400A-64]

For those of you that have SW Sedans and have not recieved my survey form....PLEASE send me your E-mail address or your Street Address and I will respond asap!! If you have any questions or comments ...let me know.
MANY THANKS !
Bruce Davis [email protected] or [email protected]

[Marco Tahtaras]

Originally Posted by Tom Wesenberg

It's very possible that my 31 S/W T/S with flat firewall came from the factory with only one inside visor. The car was parked since 1957 when I bought it, and someone had removed the visor from the driver's side and nailed 3 sides to it about 1 1/2" high. They then secured it to the passenger side to use as a map pocket, etc. in the same spot the visor would mount.

If your car has no door pockets and has the large pocket w/flap on the back of the front seat then it DID NOT come from the factory with two visors. The dealer however could have ordered and installed the right visor assembly. Please read my post above.