|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-01-2017, 04:02 PM | #1 |
Member
Join Date: Oct 2016
Location: Southern California
Posts: 42
|
Broken manifold stud fix?
While trying to find an intake leak I decided to remove my manifolds. As I tried to loosen the second nut from the front it snapped. I can see it must have been bent from a previous install. I can tell two of the studs and brass nuts were newer with loctite.
Not the best way to start 2017! I'm not great with a torch so I'm thinking about drilling the center of the stud but don't want to hit to water jacket behind it. Any suggestions? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|