Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-09-2021, 10:42 AM   #1
joe 1950
Senior Member
 
joe 1950's Avatar
 
Join Date: Mar 2013
Location: Green Bay Wi
Posts: 400
Default out side dr handle 35 pick up

A very good friend of mine has a 1935 ford pk up i helped him restore @ ten years ago since then both outside door handles come out of the bezel that bolts to the door when opening i know we’re going to have to take the door panels off to see what’s broke but would like to get a heads up to pre order parts can’t seam to find a good pic of the pieces involved with holding the handle from any parts catalogs in no hurry this will be a winter project
joe 1950 is offline   Reply With Quote
Old 10-09-2021, 02:57 PM   #2
51 MERC-CT
Senior Member
 
51 MERC-CT's Avatar
 
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
Default Re: out side dr handle 35 pick up

There should be no need to remove door panels unless parts have fallen inside.
Remove the fasteners holding the bezel to the door.
There is a washer with a square hole that slides on to the handle shaft to a point where it is staked to the shaft to keep the bezel secured to the shaft.
If a way can be devised to re-secure the washer, that should fix it, otherwise new handles are in order.
The original bezel is sheet metal (not cast) and the spring is just a rattle reducer.
Attached Images
File Type: jpg 35cx.jpg (38.1 KB, 64 views)
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES

Last edited by 51 MERC-CT; 10-10-2021 at 04:37 AM.
51 MERC-CT is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-10-2021, 01:40 AM   #3
deuce lover
Senior Member
 
deuce lover's Avatar
 
Join Date: May 2010
Location: Southern France
Posts: 5,273
Default Re: out side dr handle 35 pick up

Here are pics of the repop which shows how its put together.Between the cup and inside of the escutcheon is a spring. Might be that the spring is shot ? The cup is secured by the shank being swedged.Small cotter pin works also .
Attached Images
File Type: jpg s-l640.jpg (36.7 KB, 74 views)
File Type: jpg s-l640 (1).jpg (25.7 KB, 14 views)
deuce lover is offline   Reply With Quote
Old 10-10-2021, 04:39 AM   #4
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,266
Default Re: out side dr handle 35 pick up



Reproduction out side door handle for 1935 Ford Pick-up - photo by deuce lover
mercman from oz is offline   Reply With Quote
Old 10-10-2021, 11:01 AM   #5
joe 1950
Senior Member
 
joe 1950's Avatar
 
Join Date: Mar 2013
Location: Green Bay Wi
Posts: 400
Default Re: out side dr handle 35 pick up

Sponsored Links (Register now to hide all advertisements)
Thanks for the heads up i can clearly see how that’s put together will start there first easier than pulling panels
joe 1950 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:39 AM.