The Ford Barn

PO51 · 07-28-2016, 07:23 PM

I need to do a temp (couple of months) wiring of my headlights to a switch I will mount on the dash. the headlights are on a 1928 single bulb what will I need I have no wiring at all at present. Do I need to ground them? Any ideas or thoughts would be a great help!

tbirdtbird · 07-28-2016, 07:42 PM

yes they will most likely need a ground for reliability. Run two wires, one ground and one hot

Cool Hand Lurker · 07-28-2016, 07:44 PM

Sponsored Links (Register now to hide all advertisements)

Here is a quick diagram that should work out. It will take the power right off the battery.

07-28-2016, 07:23 PM	#1
PO51 Senior Member Join Date: May 2010 Location: Upland Ca Posts: 274	Wiring I need to do a temp (couple of months) wiring of my headlights to a switch I will mount on the dash. the headlights are on a 1928 single bulb what will I need I have no wiring at all at present. Do I need to ground them? Any ideas or thoughts would be a great help!

07-28-2016, 07:42 PM	#2
tbirdtbird BANNED Join Date: May 2012 Location: inside your RAM Posts: 3,134	Re: Wiring yes they will most likely need a ground for reliability. Run two wires, one ground and one hot __________________ '31 180A