gas cap gasket

[Al]

Hi

Looking to secure the gasket on my 29 gas cap. What can be used that will hold the gasket in place?

Thanks
Al

[redmodelt]

It just floats free. The gasket outer diameter should be large enough so it doesn't fall out.

[Al]

Thanks, just looking for a sealant or glue that I could use to secure it to the cap also.

[J Franklin]

It needs to float as not to tear turning it on and off.

[redmodelt]

If your gasket is old, shrunk up etc, maybe time to get a new one.

[Bob Bidonde]

Sponsored Links (Register now to hide all advertisements)

Make a gasket from the flat side of an oil container. Oil containers are impervious to modern gasoline. Make the outside diameter of the gasket a snug fit into the cap.

[wmws]

I just use a large o ring

[Gold Digger]

Make sure not to seal off the vent holes. I made that mistake once.

[Al]

Thanks everyone for your responses.