Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-30-2020, 07:07 PM   #1
Sheldon Paulger
Junior Member
 
Join Date: Jun 2014
Location: Kelowna, BC, Canada
Posts: 10
Default Model A Distributor with Centrifugal Advance

Is there a 4 cyl distributor with centrifugal advance available at auto wreckers that would fit a Model A (with minimum modifications)?

Thks
Sheldon
Sheldon Paulger is offline   Reply With Quote
Old 08-30-2020, 07:18 PM   #2
chrs1961815
Senior Member
 
chrs1961815's Avatar
 
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
Default Re: Model A Distributor with Centrifugal Advance

Not that I am aware of. Most distributors since the 50s and probably before have a gear on the bottom end of the shaft in the place a shaft retainer would be on the Model A. Also a lot of these distributors are longer than the Model A too - they have the length of both shafts built into the housing.

If you want centrifugal advance, go find a Mallory or B distributor.
__________________
"The more things change, the more they stay the same."
chrs1961815 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-30-2020, 09:44 PM   #3
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Model A Distributor with Centrifugal Advance

How about this? I do not know how well they work.



https://www.nurex.com/automatic-spar...-advance-12176
30 Closed Cab PU is offline   Reply With Quote
Old 08-30-2020, 10:10 PM   #4
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,471
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by 30 Closed Cab PU View Post
How about this? I do not know how well they work.



https://www.nurex.com/automatic-spar...-advance-12176
That link didn't work for me. :-(
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 08-30-2020, 10:30 PM   #5
johnneilson
Senior Member
 
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,044
Default Re: Model A Distributor with Centrifugal Advance

In the current market these days I have found that VW and MG distributors can be modified to work
After the machine work is done the advance curve will need attention

John
__________________
As Carroll Smith wrote; All Failures are Human in Origin.
johnneilson is online now   Reply With Quote
Old 08-30-2020, 10:41 PM   #6
nomadpsd
Member
 
nomadpsd's Avatar
 
Join Date: Jul 2018
Posts: 49
Default Re: Model A Distributor with Centrifugal Advance

Sponsored Links (Register now to hide all advertisements)
Just buy a FSI Zipper. Has centrifugal advance made for the Model A.
nomadpsd is offline   Reply With Quote
Old 08-30-2020, 10:42 PM   #7
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by Synchro909 View Post
That link didn't work for me. :-(

Maybe try



Do a google search for Nu-Rex


www.nurex.com


on line catalog


Featured products - Automatic Spark Timing system. or


Browse timing
30 Closed Cab PU is offline   Reply With Quote
Old 08-30-2020, 10:59 PM   #8
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Model A Distributor with Centrifugal Advance

I had heard early datsuns can be altered but the advance curve is wrong. Model B curve is correct but have design issues. FSI uses hall effect adaptive dwell.Period Mallory distributors for model A, Y 11 series are out there in dual or single point setups.
Jack Shaft is offline   Reply With Quote
Old 08-30-2020, 11:38 PM   #9
The Master Cylinder
Senior Member
 
The Master Cylinder's Avatar
 
Join Date: Aug 2012
Posts: 875
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by 30 Closed Cab PU View Post
How about this? I do not know how well they work.

https://www.nurex.com/automatic-spar...-advance-12176
http://www.fordgarage.com/pages/phillipsspark.htm

http://www.fordgarage.com/pages/nurexadvance.htm
__________________
The Master Cylinder

Enjoying life at the beach in SoCal...
The Master Cylinder is offline   Reply With Quote
Old 08-31-2020, 03:24 AM   #10
john charlton
Senior Member
 
john charlton's Avatar
 
Join Date: May 2010
Posts: 1,304
Default Re: Model A Distributor with Centrifugal Advance

Prewar English small Fords had a distributor which is a straight drop in . They are fairly common at swap meets here You have to check the rotation as this small engine went to a chain drive camshaft there is an arrow on the rotor to indicate rotation .They should be about in the Antipodies (have I spelt that right ???)My son has one in his pickup and it works a treat . I cant recall what the advance is I must check .

John in sunny cool morning Suffolk County England .
john charlton is offline   Reply With Quote
Old 08-31-2020, 07:22 AM   #11
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Model A Distributor with Centrifugal Advance

The correct spark advance is 1 degree per 100 rpm,peak at 24 to 26 degrees max.Besides drivability mechanical advance eliminates detonation or spark knock, a cause of bearing failure.High compression reduces the tolerance for improper timing.The increase in engine efficiency is noticeable.
Jack Shaft is offline   Reply With Quote
Old 09-04-2020, 03:27 AM   #12
aermotor
Senior Member
 
Join Date: Mar 2015
Location: Greenville, SC
Posts: 1,099
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by Jack Shaft View Post
Period Mallory distributors for model A, Y 11 series are out there in dual or single point setups.
This is a straight away drop in, however, Mallory has been bought out several times and the 4 cylinder distributor parts are extremely hard to find.

John
aermotor is offline   Reply With Quote
Old 09-04-2020, 08:10 AM   #13
jetrod
Member
 
Join Date: May 2010
Location: Central NC
Posts: 67
Default Re: Model A Distributor with Centrifugal Advance

I use the nu-rex advance on my 2 A's-- they are a great upgrade and easy to install.
jetrod is offline   Reply With Quote
Old 09-04-2020, 09:38 AM   #14
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by aermotor View Post
This is a straight away drop in, however, Mallory has been bought out several times and the 4 cylinder distributor parts are extremely hard to find.

John
B points and condenser hard to find as well,along with a few internals.The B distributor has a design flaw,the breaker plate shaft/drive shaft get no lubrication and is small in diameter..you can get oil to it through modification.The FSI electronic distributor,either zipper A style or the stand alone industrial body style uses a hall effect style pickup and has adaptive dwell,spot on coil soak everytime.The biggest problem with the pertronix/FSI pickups is the need for clear voltage signal,tying it in with an old sketchy harness and grounds leads to failure.
Jack Shaft is offline   Reply With Quote
Old 09-04-2020, 10:06 AM   #15
Ruth
Senior Member
 
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,334
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by jetrod View Post
I use the nu-rex advance on my 2 A's-- they are a great upgrade and easy to install.
Me too. And as a side benefit it is fun to watch 'Ace Mechanics' in the group try to explain why I have so much "play" in my distributor drive.
__________________
Ruth
"Sometimes you really DO need to read the whole thread"
Ruth is offline   Reply With Quote
Old 09-04-2020, 04:16 PM   #16
john in illinois
Senior Member
 
john in illinois's Avatar
 
Join Date: May 2010
Location: Illinois
Posts: 2,181
Default Re: Model A Distributor with Centrifugal Advance

A friend got a Nurex advance with his new rebuilt engine and he likes it.
Had it a couple of years.

John
__________________
Welcome each day
john in illinois is offline   Reply With Quote
Old 09-04-2020, 04:48 PM   #17
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,471
Default Re: Model A Distributor with Centrifugal Advance

The advance built into these distributors is set for a standard engine with a standard head. We know that as compression rises, less advance is needed.
Does anybody have an idea on how much less advance is needed for a 5.5:1 head? Same question for other after market heads that are available all the way up to about 8 or 9 to 1.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 09-04-2020, 08:52 PM   #18
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,017
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by Jack Shaft View Post
B points and condenser hard to find as well,along with a few internals.The B distributor has a design flaw,the breaker plate shaft/drive shaft get no lubrication and is small in diameter..you can get oil to it through modification.The FSI electronic distributor,either zipper A style or the stand alone industrial body style uses a hall effect style pickup and has adaptive dwell,spot on coil soak everytime.The biggest problem with the pertronix/FSI pickups is the need for clear voltage signal,tying it in with an old sketchy harness and grounds leads to failure.
I solved the condenser problem by using a high quality Model A condenser from Brattons. I elongated the hole in the tab and added a pig tail. It went right in (see photo). I bought several sets of NOS points a few years ago and haven't checked their availability recently. If I was looking for points (or other Model B parts) I would start with Renner's Corner, (734) 428-8424.

Charlie Stephens
Attached Images
File Type: jpg IMG_5690.jpg (93.9 KB, 70 views)
File Type: jpg IMG_8204.jpg (52.0 KB, 80 views)
Charlie Stephens is offline   Reply With Quote
Old 09-04-2020, 09:58 PM   #19
Perry
Junior Member
 
Join Date: Jul 2012
Location: Satsuma,AL
Posts: 15
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by jetrod View Post
I use the nu-rex advance on my 2 A's-- they are a great upgrade and easy to install.
I have a 5.5 head, is this OK or do I need something else?
Perry is offline   Reply With Quote
Old 09-05-2020, 06:42 AM   #20
old31
Senior Member
 
Join Date: Jan 2016
Posts: 2,088
Default Re: Model A Distributor with Centrifugal Advance

Quote:
Originally Posted by nomadpsd View Post
Just buy a FSI Zipper. Has centrifugal advance made for the Model A.
FYI. The fsi Zipper does not work with HC heads. I tried it and had to send it back. FSI admitted that it will not work.

I suggested that they say that in there advertising it is not intended for HC heads, but that went to deaf ears.
old31 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:27 PM.