The Ford Barn

Paolo Volpe · 07-09-2020, 11:38 AM

I’ve Been working on my windshield wiper motor after removing the motor cover and setting it a side I completed my inspection of the brushes and cleaned it up a bit with wd 40. The cover has some small dents and chips in the paint so while I have it off I decided to repaint it. after closer inspection I started picking at one of the chips and it appeared to be brass under the paint. Used a razor blade to remove the paint wet sanded a section of the cover and used never-dull, wow it look great. Am I correct in assuming it came form the factory unpainted brass ?
Thanks Paul

07-09-2020, 11:38 AM	#1
Paolo Volpe Junior Member Join Date: Feb 2014 Posts: 6	Wiper motor cover I’ve Been working on my windshield wiper motor after removing the motor cover and setting it a side I completed my inspection of the brushes and cleaned it up a bit with wd 40. The cover has some small dents and chips in the paint so while I have it off I decided to repaint it. after closer inspection I started picking at one of the chips and it appeared to be brass under the paint. Used a razor blade to remove the paint wet sanded a section of the cover and used never-dull, wow it look great. Am I correct in assuming it came form the factory unpainted brass ? Thanks Paul