|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-17-2020, 04:51 PM | #1 |
Junior Member
Join Date: May 2010
Location: Sacramento, CA
Posts: 6
|
1929 Coupe Latch Assembly Question
My passenger (right in pic) door latch assembly wasn’t working so I yanked it out to replace the springs. To my surprise, there were none! So I yanked the driver (left it pic) to use as a guide for assembly. I noticed the driver side had a lever in it that the passenger didn’t. Is this correct? Is this the locking mechanism from the inside? Do I need to replace this passenger latch if I can’t find this piece?
|
11-17-2020, 06:01 PM | #2 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,713
|
Re: 1929 Coupe Latch Assembly Question
This link may help. https://www.fordbarn.com/forum/showt...ght=door+latch
|
Sponsored Links (Register now to hide all advertisements) |
|
11-17-2020, 08:36 PM | #3 |
Junior Member
Join Date: May 2010
Location: Sacramento, CA
Posts: 6
|
Re: 1929 Coupe Latch Assembly Question
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|