The Ford Barn

daren007 · 02-22-2022, 01:47 PM

A lot of unnecessary work and a lot of frustration just to create oil leaks.

Big hammer · 02-22-2022, 05:50 PM

If it’s not broken………..or someone else is trying to justify a new Burtz engine!

Synchro909 · 02-22-2022, 07:55 PM

Quote:

Originally Posted by BTERRY29

If you where to do it this way, would you back off and loosen your previous main or rod to not influence the one you are currently working on? Then when completing all, go back and torque all of them to spec.

Yes.

BTERRY29 · 02-22-2022, 08:17 PM

Quote:

Originally Posted by Synchro909

Yes.

thank you.

02-22-2022, 01:47 PM	#21
daren007 Senior Member Join Date: Apr 2015 Location: Saint Cloud Mn Posts: 745	Re: Checking the Bearing Clearances A lot of unnecessary work and a lot of frustration just to create oil leaks.

02-22-2022, 05:50 PM	#22
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: Checking the Bearing Clearances If it’s not broken………..or someone else is trying to justify a new Burtz engine! __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done