Schneider 258F Y Block Cam

[55blacktie]

Has anyone put the Schneider Racing 258F camshaft in their Y Block? I have yet to install mine, and would like to hear from someone who is running it.

[miker98038]

If you put the spec's it would probably get some comments from people with similar cams.

Or go to John Mummert's site and compare to his cam listings and recommendations. I don't know who grinds his (my last one was a Clay Smith). I've run 3 of John's cams, 270 and 280, and I find his description to a little conservative. But I'm using manual transmissions and I'm used to longer cams.

Half way down is the chart.

http://www.ford-y-block.com/valvetrain.htm

There's also a current discussion on lifters going on at yblocksforever, worth a read before you do the install.

http://forums.y-blocksforever.com/Topic152958.aspx

[55blacktie]

Thanks. I'm hoping to hear from someone who has Schneider's 258F camshaft in their Y.

[JeffB2]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 55blacktie

Thanks. I'm hoping to hear from someone who has Schneider's 258F camshaft in their Y.

You might scroll through here: https://www.youtube.com/results?sear...er+y-block+Cam