|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-08-2021, 07:26 AM | #1 |
Member
Join Date: Jul 2010
Location: Perth Hills Western Australia
Posts: 58
|
Marvel Schebler carburettor
Has anyone used a Marvel Schebler carburettor on their Model A motor?
I have a Model 10-2929 that was used on a A Model powered race car and trying to work out if there’s a benefit using it opposed to a 94 or 97 carb. Thanks for any input. |
05-08-2021, 09:04 AM | #2 |
Senior Member
Join Date: Jul 2010
Location: Eau Claire, WI
Posts: 113
|
Re: Marvel Schebler carburettor
As I understand it thr Marvel Schebler updraft carburetor was an aftermarket replacement for the original Zenith or Tillotson. I have been using one for 10 years. They are very simple, easy to clean and adjust. They do run very well. On the downside, the diecast zinc castings tend to warp and leak. I have had to press and scrape the top casting to get a seal.
|
Sponsored Links (Register now to hide all advertisements) |
|
05-08-2021, 09:20 AM | #3 |
Senior Member
Join Date: Jan 2016
Posts: 2,094
|
Re: Marvel Schebler carburettor
Marvel will out perform a Zenith and Tilley but not a 94 or 97 carb.
|
05-08-2021, 10:06 AM | #4 |
Member
Join Date: Jul 2010
Location: Perth Hills Western Australia
Posts: 58
|
Re: Marvel Schebler carburettor
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|