|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-24-2021, 07:34 PM | #1 |
Senior Member
Join Date: May 2010
Location: London On, Can.
Posts: 377
|
new 30 MA fenders
I would like to buy 4 new 1930 Model A roaster fenders Is there one company that makes them and many that sell the same ones . Or are some other makes better than others. Any suggestions
|
03-24-2021, 08:19 PM | #2 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
|
Re: new 30 MA fenders
Find a dealer for Albrecht rears
Gaslight is only front fender mfg Find original fronts if you can |
Sponsored Links (Register now to hide all advertisements) |
|
03-25-2021, 06:41 AM | #3 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: new 30 MA fenders
Try Rootlib in Turlock, CA
|
03-25-2021, 07:45 AM | #4 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
|
Re: new 30 MA fenders
School me here....
I thought rootlieb made T bodies, hoods and runningboards. Now fenders? Haven’t checked their website Their website says only T fenders Last edited by Oldbluoval; 03-25-2021 at 08:09 AM. |
03-25-2021, 08:18 AM | #5 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: new 30 MA fenders
You are probably right! School is out!
|
03-25-2021, 09:20 AM | #6 |
Senior Member
Join Date: May 2010
Location: albany
Posts: 465
|
Re: new 30 MA fenders
Sponsored Links (Register now to hide all advertisements)
|
03-25-2021, 09:32 AM | #7 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,390
|
Re: new 30 MA fenders
You might consider fibergglass??
WESCOTT'S, Boring, Oregon. Owner posts here. FWIW, not trying to start a controversy, just another option and they would probably be less work/money to fit. Paul in CT |
03-25-2021, 10:48 AM | #8 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,903
|
Re: new 30 MA fenders
Do a search here for new fenders. You will find many tales of risk and reward.
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. |
03-25-2021, 12:08 PM | #9 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
|
Re: new 30 MA fenders
It’s the fronts that are demons! And with 30 you have to add the short shield which is another high hurdle in itself. I wouldn’t even start with repo fronts but I’m fortunate with bunches
The Albrecht rears work well.....at least they did 5 years ago If you go fiberglass Karl Westcott’s do work very well. But they are still fiberglass |
03-25-2021, 03:22 PM | #10 |
Senior Member
Join Date: May 2010
Location: Concord CA
Posts: 635
|
Re: new 30 MA fenders
when I did my 31 Roadster P/U about 5 years ago, I bought fenders like OldBluoval suggests. Steel rear, fit like a glove, and Fiberglass fronts. They also fit very well especially at the splash aprons. I don't have metal working skills, so this was the best way around the tree.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|