|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-15-2018, 01:52 PM | #1 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
ford flathead v8 crankshaft pully
what is the diameter of the front crankshaft pulley?
|
01-15-2018, 02:00 PM | #2 |
Senior Member
Join Date: May 2010
Location: Mill Valley,Ca.
Posts: 1,509
|
Re: ford flathead v8 crankshaft pully
What year/ type car?
Karl |
Sponsored Links (Register now to hide all advertisements) |
|
01-15-2018, 02:48 PM | #3 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: ford flathead v8 crankshaft pully
Also,
1,2,or 3 belt and which one of the group?
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
01-15-2018, 03:21 PM | #4 |
Senior Member
Join Date: May 2010
Location: Coral Springs FL
Posts: 10,879
|
Re: ford flathead v8 crankshaft pully
My 1950 Merc wide belt pulley is 5 1/2 in.
It's the same as this. https://www.ebay.com/itm/1949-50-51-...bRIyTQ&vxp=mtr Last edited by 19Fordy; 01-16-2018 at 09:26 AM. |
01-15-2018, 04:38 PM | #5 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
Re: ford flathead v8 crankshaft pully
this is a 1935 ford flathead
|
01-15-2018, 04:55 PM | #6 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: ford flathead v8 crankshaft pully
Sponsored Links (Register now to hide all advertisements)
|
01-17-2018, 07:03 AM | #7 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
Re: ford flathead v8 crankshaft pully
thank you sir for the reply back.i am having trouble getting the fan belt to go over the pullies. i ordered the belt from mac's and it is 55 inches long but still will not work. any suggestions?
|
01-17-2018, 07:10 AM | #8 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,279
|
Re: ford flathead v8 crankshaft pully
I have bone stock 35 21 stud in my '33 and I had to go to a 56" belt.Bought it on EBAY.The Gates # B53,Dayco # BP53,Goodyear # B53(5L220)
|
01-17-2018, 07:21 AM | #9 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,732
|
Re: ford flathead v8 crankshaft pully
You can try unbolting the generator fully and refitting it with the belt in place. I have found also that it is sometimes easier to put the belt on one of the water pumps last, it goes over that pulley easier than the generator pulley.
Mart. |
01-17-2018, 07:28 AM | #10 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: ford flathead v8 crankshaft pully
It´s the size of the generator pulley that makes the difference.
Sounds about the same sizes i keep at hand B52 and B53 for the pumps and B35 for separate fans. |
01-17-2018, 07:40 AM | #11 |
Senior Member
Join Date: May 2010
Location: va
Posts: 138
|
Re: ford flathead v8 crankshaft pully
thanks guy's for the information
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|