The Ford Barn

green50 · 04-27-2014, 10:52 AM

On my 50 Custom there is a bronze bushing in the pivot bolt hole on the clutch release equalizer bar. It looks quite worn. Does anyone make/sell these? Thanks

Old Henry · 04-27-2014, 01:37 PM

Is this it? http://www.macsautoparts.com/ford_me...ford-only.html

jack orchard · 04-27-2014, 06:42 PM

Also check the condition of the ball that bolts to the frame and the hole on the equalizer bar (also known as clutch release lever). The ball might out of round. The equalizer bar hole might be badly worn on one side, too. Good luck.,,jack

Barry-ct · 04-27-2014, 06:59 PM

Most of the repo guys have them and you could still get them at one time from your local Ford dealer. I worked for a dealer up until 2 years ago and I ordered them from our facing depot. They fit a lot of different model Fords ( cars and trucks ) up into the mid 70's. If you have a parts book, look them up or maybe someone here has the part number handy and you can call a local dealer and ask.

paul2748 · 04-27-2014, 08:04 PM

Sponsored Links (Register now to hide all advertisements)

If it's the one that is roundish, Ford used these at least up to the 50's and most likely later. Yes, the parts suppliers have these.

04-27-2014, 10:52 AM	#1
green50 Senior Member Join Date: Dec 2013 Location: North Georgia Posts: 392	Clutch Release Equalizer Bar On my 50 Custom there is a bronze bushing in the pivot bolt hole on the clutch release equalizer bar. It looks quite worn. Does anyone make/sell these? Thanks __________________ Gene

04-27-2014, 01:37 PM	#2
Old Henry Senior Member Join Date: Oct 2010 Location: Orem, Utah Posts: 5,762	Re: Clutch Release Equalizer Bar Is this it? http://www.macsautoparts.com/ford_me...ford-only.html __________________ Prof. Henry (The Roaming Gnome) "It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness

04-27-2014, 06:42 PM	#3
jack orchard Senior Member Join Date: Jun 2011 Location: summerfield florida Posts: 383	Re: Clutch Release Equalizer Bar Also check the condition of the ball that bolts to the frame and the hole on the equalizer bar (also known as clutch release lever). The ball might out of round. The equalizer bar hole might be badly worn on one side, too. Good luck.,,jack __________________ Proud FNG We fixem cars. Heap Good! Last edited by jack orchard; 04-27-2014 at 06:54 PM. Reason: because i wanted to

04-27-2014, 06:59 PM	#4
Barry-ct Senior Member Join Date: May 2010 Location: Newington, Connecticut Posts: 1,374	Re: Clutch Release Equalizer Bar Most of the repo guys have them and you could still get them at one time from your local Ford dealer. I worked for a dealer up until 2 years ago and I ordered them from our facing depot. They fit a lot of different model Fords ( cars and trucks ) up into the mid 70's. If you have a parts book, look them up or maybe someone here has the part number handy and you can call a local dealer and ask. __________________ Barry 50 F-1

04-27-2014, 08:04 PM	#5
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,982	Re: Clutch Release Equalizer Bar Sponsored Links (Register now to hide all advertisements) If it's the one that is roundish, Ford used these at least up to the 50's and most likely later. Yes, the parts suppliers have these.