|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-21-2015, 07:33 PM | #1 |
Junior Member
Join Date: Mar 2015
Location: Brush Prairie, Washington
Posts: 14
|
55 Customline Trunk Lock Assembly
Hello - First time post.
Would someone who owns a 55 Customline (or perhaps Mainline) with the stock trunk lock be willing to take a few photos of the assy that is mounted inside and outside the trunk lid? Or provide a detailed diagram of the same. I currently have a shaved trunk with a cable pull mounted underneath the car but want to go to the stock setup. I have bought some parts from Mac's but it seems that there should be an attach plate of some kind inside the lid. Thanks much! |
03-21-2015, 11:18 PM | #2 | |
Senior Member
Join Date: May 2010
Location: Willetton, West Australia
Posts: 478
|
Re: 55 Customline Trunk Lock Assembly
The original 55 Customline trunk lock is not reproduced. There are studs on the assembly which bolt it to the trunk plus there is a big nut and tapered washer on the lock barrel which pulls the top of the assembly tight. You just have to watch eBay and they come up occasionally. The plastic insert and the gasket to seal the trunk are both reproduced.
__________________
Rick West Australia 1958 Ford Mainline Utility, 1955 Ford Tudor Sedan Quote:
|
|
Sponsored Links (Register now to hide all advertisements) |
|
03-21-2015, 11:34 PM | #3 | |
Senior Member
Join Date: May 2010
Location: Willetton, West Australia
Posts: 478
|
Re: 55 Customline Trunk Lock Assembly
Here's a pic of the Customline assebly.
__________________
Rick West Australia 1958 Ford Mainline Utility, 1955 Ford Tudor Sedan Quote:
|
|
03-22-2015, 10:11 AM | #4 |
Junior Member
Join Date: Mar 2015
Location: Brush Prairie, Washington
Posts: 14
|
Re: 55 Customline Trunk Lock Assembly
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|