|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-07-2023, 07:31 PM | #1 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Rebuild Procedure for a Stewart-Warner Round Speedo
There is a 1994 written procedure for overhauling the oval speedo. I would like to take a stab at overhauling the '30-'31 Round speedo, which is supposedly not quite as complicated. Do you know of anyone who has done a write-up on the '30-'31? (Or, who would like to talk me out of it, because of the need for special tools, etc.?)
|
08-07-2023, 09:27 PM | #2 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
Quote:
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
Sponsored Links (Register now to hide all advertisements) |
|
08-07-2023, 09:35 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
The 1994 article says that the round is easier to address technically, but they devote the entire article to the oval speedo. I'm interested in the mechanical aspects of the restoration. There are folks who restore these, but that's not my direction at the moment.
|
08-08-2023, 08:11 AM | #4 |
Senior Member
Join Date: Jan 2021
Location: Western NC
Posts: 213
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
Try sending a message to PapaNick. He does a nice job rebuilding speedometer for a reasonable fee. He can probably give you an idea of what is involved.
__________________
1930 Standard Coupe |
08-08-2023, 08:46 AM | #5 |
Senior Member
Join Date: May 2010
Location: La Mesa Ca
Posts: 1,166
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
Check out Bob Johnson's cabriolet website. Click on Tech Info then speedometer articles.
|
08-08-2023, 10:03 AM | #6 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
Sponsored Links (Register now to hide all advertisements)
|
08-08-2023, 10:06 AM | #7 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
I have seen his advertisements on here. I've also used Dennis Ellerman for rebuilds. These gentlemen are in the business of selling their services. I was hoping to find someone who was interested in the technical aspects of the rebuild, and who might have published something.
|
08-08-2023, 05:22 PM | #8 |
Senior Member
Join Date: May 2010
Location: La Mesa Ca
Posts: 1,166
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
www.cabriolet.modelahouse.com for speedo info
|
08-09-2023, 05:48 PM | #9 |
Member
Join Date: Oct 2019
Location: Central Shenandoah Valley,Waynesboro,Va.
Posts: 93
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
See if this helps,it is quite long.model a speedometer repair; Handouts courtesy of THE BEAVER CHAPTER, MAFCA Portland, Oregon
__________________
It's not the destination ,it's the journey . |
08-09-2023, 08:25 PM | #10 |
Senior Member
Join Date: Jun 2010
Location: Madison, NJ
Posts: 156
|
Re: Rebuild Procedure for a Stewart-Warner Round Speedo
Thanks to Ray and Steve for their providing the URL to the Cabriolet site, which contains the Beaver Chapter article among several others of value. Even Wiley Higgins has an article there, so I can tap him for some thoughts.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|