04-10-2017, 03:17 PM | #1 |
Senior Member
Join Date: May 2015
Posts: 292
|
Horn hookup
Hi,
I just picked up a Sparton horn for my car and was curious what connectors I need to use to get juice to it? My car had bullets on the end of the wires for the old horn. Sent from my SM-N920V using Tapatalk
__________________
1931 Model A Victoria 1950 Mercury 8 Member: MAFCA, MARC, Northern Ohio Model A Club www.northernohiomodela.com |
04-10-2017, 03:30 PM | #2 |
Senior Member
Join Date: Mar 2016
Location: Lynden, WA
Posts: 1,564
|
Re: Horn hookup
My Sparton horn uses bullets as well.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-10-2017, 03:36 PM | #3 |
Senior Member
Join Date: May 2015
Posts: 292
|
Re: Horn hookup
So do the bullets just side under those metal tabs at the bottom?
Sent from my SM-N920V using Tapatalk
__________________
1931 Model A Victoria 1950 Mercury 8 Member: MAFCA, MARC, Northern Ohio Model A Club www.northernohiomodela.com |
04-10-2017, 03:51 PM | #4 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,747
|
Re: Horn hookup
I think this is a picture Tom posted.
Bob |
04-10-2017, 03:53 PM | #5 |
Senior Member
Join Date: May 2014
Location: Commercial Point, Ohio
Posts: 239
|
Re: Horn hookup
Bob's picture is correct. They just slide under the tabs with the end of the bullets facing the center screw. That way they are less likely to pull out of the hole on the horn cover.
|
04-10-2017, 04:08 PM | #6 |
Senior Member
Join Date: May 2015
Posts: 292
|
Re: Horn hookup
Sponsored Links (Register now to hide all advertisements)
Sent from my SM-N920V using Tapatalk
__________________
1931 Model A Victoria 1950 Mercury 8 Member: MAFCA, MARC, Northern Ohio Model A Club www.northernohiomodela.com |
|
|
Sponsored Links (Register now to hide all advertisements) |
|