CB antenna mount

[BillEbob]

Looking for a CB antenna mount that will fit on my '31 Vicky. Have any of you discovered one that mounts well on an A's bumper?

I'm not finding one that looks like it will work. I'm planning on mounting a Firestick on this mount.

Not wanting to do a lot of fabrication.

Bill

[Bleedblue4life]

Go to your local truck stop there will be different mounting brackets you can choose from. I was able to find a thinner one that, once drilling the hole bigger, mounted to the backside of the bumper clamp.

[BillEbob]

Originally Posted by Bleedblue4life

Go to your local truck stop there will be different mounting brackets you can choose from. I was able to find a thinner one that, once drilling the hole bigger, mounted to the backside of the bumper clamp.

Thanks for your Good idea! I hadn't thought of that.

I just knew someone on this forum had to have installed a CB radio in their "A!"

Bill

[Jerry in Shasta]

I made a 4" X 4" metal pad mounted to the bumper. Then I use a magnetic base to mount the antenna to the plate.

[duke36]

Some use a rumble seat step pad clamp (no pad of course) to the bumper arm

[BillEbob]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Bleedblue4life

Go to your local truck stop there will be different mounting brackets you can choose from. I was able to find a thinner one that, once drilling the hole bigger, mounted to the backside of the bumper clamp.

Went to truck stop today. No luck.

I'll check out these other ideas.

[BillEbob]

Originally Posted by duke36

Some use a rumble seat step pad clamp (no pad of course) to the bumper arm

So I just re-read your post -- originally, I thought you meant the pad AND the clamp, but, of course, the pads are aluminum therefore, not magnetic. But upon closer review I see that you are indicating the clamp only incorporating a piece of steel plate to attach the magnetic base!

Clever, Mr McGuiver! 😂

[John Stone]

Seems I have different mounts on my cars. Pictures attached.

[BillEbob]

Thank you for posting those pictures!

Bill

[Bob Wright]

Bill,
This is what I made out of 2" aluminum angle for our 31 Vickie, wish the picture's were clearer. Also they sell a variety @ Radio Shack.
Bob

[Ray in La Mesa]

Punch in CB antenna mount on ebay.

[4port]

Vise grip CB mount. Any location, any position. Easy on and off when you don't need it. Google it, many for sale everywhere, although I make my own.