Lets play.. Name that part!

[goleafsgo_12]

Its time to play name that part. Who knows what bracket is what/ and goes where? 1 through 12, have a look. I have.. well.. no prizes.. but you get forum bragging rights!

[TK in LA]

1) Door pull 3) Inside bottom brace @ the spare tire 7) Door opening top 28/29 10) Shield on the floor around the pedals. At least that's what I call them! Carry on!

[LukeDahlinger]

1) Door garnish mouldings. Could be for a Coupe, Tudor Sedan, Pickup or any other 'metal framed door' Length is the determining factor.

2) This goes at the top of the door on cars listed in #1. Here again length will determine what it fits. You take this piece off to install or remove the glass.

3)Rear brace for a rumble seat or trunk equipped car. This tucks into the lower panel below the rumble or trunk lid.

4) Coupe or Roadster rear braces. Found in either Coupe or Roadster.

5) Can't make out what these are.

6) Looks like 4 door sedan door pillars

7) see #11

8) Coupe braces inside quarter panels.

9) Rear side braces Coupe or Roadster. These attach to the rear wheel well on each side

10) Seal cover for Steering column

11)These go over the doors in a Coupe or Tudor Sedan. These get covered up by #7

12) Front braces in the rumble/trunk area. Coupe or Roadster

[Jim Parker Toronto]

I think Luke has it covered. Ryan, you could send him some snow, I hear we have a lot coming!

[goleafsgo_12]

Awesome, thanks Luke!

[goleafsgo_12]

Sponsored Links (Register now to hide all advertisements)

Here is a better picture of #5. Roughly 1 foot long (from memory). Its a formed channel with curved ends, about 5/8" thick.

For the seal covers around the steering column (10), where do they mount on to? Is there a left and a right?

[goleafsgo_12]

One more part.

[jw hash]

#5 is the reinforcement for the a 30-31 cowl lights go`s from the door post to the fire wall