1932 ford fuel gauge dissaembly

[B-O-B]

Large size like 12 ga copper wire will work but needs to be solid copper & length is critical. On the length you just have to keep fooling with it to get the right length. Make up several lengths is probably easiest.
A dollar store should have metal prep. Well mine did anyway in gal plastic jug, sez concrete & metal prep.

[tubman]

I've found the Dollar Stores to be excellent sources for automotive chemicals. My local "Dollar General" had Marvel Mystery Oil at less than half the price of my "discount" at the parts store across the highway.

[FlatheadTed]

Brass 1/16 welding rod does it to about a 1"

[cas3]

thanks very much, i'm on it

[materguru]

Dave
is there a sheet or page somewhere I thought I saw one that is directions on how to add the dye and calibrate the gauge? I looked through the bulletins but its a little ambiqious but it may be I'm a little thick.

[materguru]

Sponsored Links (Register now to hide all advertisements)

got it. King-Seeley has excellent explanation as well as Ford bulletins. Thanks all. How do you get the ferrule to seal around the air line? mine wont. When I tighten it down the air line still pulls out.

[deuce lover]

It has to be soldered at least mine did.

[DavidG]

Originally soldered as Sheldon indicates.

[Oliver1932]

Finally does that works? what an super thread!

Olivier