|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-15-2020, 01:14 PM | #1 |
Member
Join Date: Apr 2019
Posts: 69
|
Which throw out bearing for 1961 Galaxie T85
This is for a 1961 Galaxie Sunliner 292 w/ T-85; I assume it's a std duty clutch. I believe the clutch has low miles. We're getting some squeak from the clutch area that goes away when the clutch pedal is depressed. This car sat for years and I suspect the bearing has dried up.
Rock Auto is giving me some visually different throw out bearings for our application. I need help zeroing in on one. (note: I've never bought a "self aligning" throwout bearing. Not sure if that's just a preference thing or not.) The part description for the below image says: "Bearing Assembly Thrust Type; with Standard Duty Clutch; Thru 10 inch disc" This next one says: " Bearing Assembly Sealed Self-Aligning; with Standard Duty Clutch; Thru 10 inch Disc" Next one says: "Bearing Only; with Standard Duty Clutch; Thru 10 inch Disc" Last one: "Assembly; Standard Clutch" Recommendation? EDIT: Image 2 and 4 seem to be the same part. Is image 1 the same (or a minor variant of) as 2 & 4? |
12-15-2020, 03:41 PM | #2 |
Senior Member
Join Date: Dec 2010
Location: p.e.i.
Posts: 1,060
|
Re: Which throw out bearing for 1961 Galaxie T85
the last one is the one you need..the one above that is bearing only you use your old holder.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-16-2020, 03:34 PM | #3 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,506
|
Re: Which throw out bearing for 1961 Galaxie T85
Sponsored Links (Register now to hide all advertisements)
If your throw out hub is good then a person can just replace the bearing on the hub. That's your third photo as was mentioned. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|