Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-05-2018, 04:08 PM   #1
Steve Staysko
Senior Member
 
Steve Staysko's Avatar
 
Join Date: May 2010
Location: Dewinton, Alberta, Canada
Posts: 463
Default Bubba 34 Condenser

Bubba i wish you would build and sell the Vertex Mag "lifetime" condenser modified to fit a 34 helmet distributor please I'm tired of replacing faulty condensers. If you build it they will come and I will be the first to order one!
Steve Staysko is offline   Reply With Quote
Old 09-06-2018, 04:32 AM   #2
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,725
Default Re: Bubba 34 Condenser

I believe Bubba did post a photo of an original style condenser modified so the mag condenser would fit inside the case. Also possible to solder the ground strap to the rear of the mag condenser case. Both modifications use a screw and nut to attach the wire end to the coil. Check this link:
https://www.fordbarn.com/forum/showthread.php?t=250123

Last edited by Terry,OH; 09-06-2018 at 04:38 AM.
Terry,OH is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-06-2018, 08:02 AM   #3
Kube
Senior Member
 
Kube's Avatar
 
Join Date: May 2010
Location: Wisconsin, USA
Posts: 8,937
Default Re: Bubba 34 Condenser

Quote:
Originally Posted by Terry,OH View Post
I believe Bubba did post a photo of an original style condenser modified so the mag condenser would fit inside the case. Also possible to solder the ground strap to the rear of the mag condenser case. Both modifications use a screw and nut to attach the wire end to the coil. Check this link:
https://www.fordbarn.com/forum/showthread.php?t=250123
I did just that a few days ago for a 36 I am working on. Simple enough and even on a concourse vehicle, it is impossible to detect.
__________________
"I can explain it for you. However, I can't understand it for you".
Kube is offline   Reply With Quote
Old 09-06-2018, 09:46 AM   #4
BUBBAS IGNITION
Senior Member
 
BUBBAS IGNITION's Avatar
 
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
Default Re: Bubba 34 Condenser

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Steve Staysko View Post
Bubba i wish you would build and sell the Vertex Mag "lifetime" condenser modified to fit a 34 helmet distributor please I'm tired of replacing faulty condensers. If you build it they will come and I will be the first to order one!
Not a problem just send me the condensor you want done up ( as there are some variations) and we can get it done.........
__________________
If it Makes Spark, we do it !!!!
www.bubbasignition.com
[email protected]
BUBBAS IGNITION is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:10 AM.