38/39 side hood badges.....

[39portlander]

So who might have those little square end bolts that hold the badges to the hood sides. Any input would be great, I have some ideas to make a set but...

[GaryU.]

I took some same sized machine head screws and filled the slots with solder, then tin/zinc plated them to try to hide what they started as. Hoping nobody notices.

[39portlander]

Sponsored Links (Register now to hide all advertisements)

That's a good idea Gary, If I can't locate the proper ones was going to braze a dot of solder on a brass bolt and use a square head nut spun to the end of the threads to hold it in the badge.