Rear turn signals -47 Ford Cpe-HOW ??

[cuddles1]

I am stumped??? 7-wire turn signal; where do I splice in the left & right rear turn signal wire's? They should work of the brake light wire, NO!!!! Some one draw me a simple diagram? Thank you kindly......Dave

[Old Henry]

Each switch can be different.
Here's a typical diagram:


Here's a PDF with three others to give you some ideas.

[40cpe]

Your brake lights are now on one wire from the brake switch that light up both rear lights. The load side of the brake switch will now go to the signal light switch on the column. There is a separate wire from the signal switch that goes to each rear brake light. You might just as well to abandon the brake light wires and run new ones from the signal switch to each rear brake light.

[Old Henry]

I put these vintage turn signals in my back window to avoid all of that rewiring. They work great (had to wire to a flasher to get them to blink). I've seen them for sale on ebay since I bought mine there.

[cuddles1]

Sponsored Links (Register now to hide all advertisements)

Thank you Guys for your response! The brain has finally turned "ON" and the current is flowing in the positive direction. Have a great day, and take your Ford out to lunch. (Gas'er Up)