|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-13-2020, 07:21 PM | #1 |
Senior Member
Join Date: Jul 2011
Location: Omak, Washington
Posts: 207
|
Bolts that hold battery clamp assembly
I'm looking for a source for hold down bolts for the battery clamp for a 1937 pickup. In the green book they are listed as 77-810748 and 77-810749. I can find the carriers and the clamps, but no one seems to have the bolts. Any ideas for a source?
|
12-13-2020, 08:57 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,407
|
Re: Bolts that hold battery clamp assembly
You could contact Michael at Third Gen Automotive, I have seen him selling two different lengths. I have also seen some posted on e-bay recently.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-14-2020, 07:14 AM | #3 |
Senior Member
Join Date: May 2010
Location: Edgefield, SC
Posts: 811
|
Re: Bolts that hold battery clamp assembly
37 truck....The battery bolts for the 37 pickups/trucks are different lengths for the driver side and passenger side. They are unique to the trucks/pickups. The stock passenger car battery bolts are too short and will not work on either the passenger or driver side on the pickup/truck with a stock battery hold down and stock battery height. The correct battery bolts for the pickups/trucks can be difficult to find. Hopefully Third Generation can help. I bought some from All Ford Parts in California several years ago and Paul at American Parts had some as well. Put a post in the "Wanted" section on Fordbarn and maybe someone has some spares.
|
12-14-2020, 03:42 PM | #4 |
Senior Member
Join Date: Nov 2020
Location: SW WA
Posts: 639
|
Re: Bolts that hold battery clamp assembly
I found this online to see if I have what your looking for on a junker ‘37 cab I have. I do have one of these bolts, however it’s not in the best condition.
|
12-14-2020, 04:48 PM | #5 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
Re: Bolts that hold battery clamp assembly
We usually make them using treaded rod stock from the hardware store. Bend a hook on the lower end and put put a washer and nut on the top.
|
12-14-2020, 06:12 PM | #6 |
Senior Member
Join Date: Sep 2020
Location: Mount Desert, Maine
Posts: 504
|
Re: Bolts that hold battery clamp assembly
Sponsored Links (Register now to hide all advertisements)
__________________
No job’s done ‘til it’s all done |
12-15-2020, 10:37 AM | #7 |
Senior Member
Join Date: Jul 2011
Location: Omak, Washington
Posts: 207
|
Re: Bolts that hold battery clamp assembly
I'd be interested in those bolts if they are the two correct lengths. Let me know, PM me if you want.
|
12-23-2020, 07:31 PM | #8 |
Senior Member
Join Date: Jul 2011
Location: Omak, Washington
Posts: 207
|
Re: Bolts that hold battery clamp assembly
Found NOS at South Side Obsolete in Faribault, MN. Apparently he has lots of old parts in multiple buildings. Nice to see someone still has original parts.
|
12-23-2020, 07:40 PM | #9 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,320
|
Re: Bolts that hold battery clamp assembly
This should be the first "go to guy" when looking for NOS parts. He has an amazing selection.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|