Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-14-2018, 09:10 PM   #1
daveymc29
Senior Member
 
daveymc29's Avatar
 
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,548
Default 33 Ford unreliable

So here's the dilemma. My friend is no mechanic and has a 33 Ford fordor he bought about 1992. It has mostly set around as he had overheating and starting problems with it. He took it to some guy in Hayward, CA and spent some big bucks getting it in running order. I think his Blackhawk address helped to get him fleeced and the car never was one that anyone could jump in and drive ten miles without using their AAA card to get home. About the only changes it has that should affect it is the engine is now a 59AB block and it has been converted to 12 volt and hydraulic brakes. So the question is, is there a reputable repair facility in the east bay, preferably close to Danville where he would be able to get honest appraisal and work to make it a driver instead of a butt of jokes? I'd like to hear you recommendations.
daveymc29 is offline   Reply With Quote
Old 07-14-2018, 09:19 PM   #2
mrtexas
Senior Member
 
mrtexas's Avatar
 
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,393
Default Re: 33 Ford unreliable

Send out the carburetor and coil to be rebuilt, install and drive without failures!
__________________
41 woodie https://41fordwoodie.weebly.com/
mrtexas is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-14-2018, 09:30 PM   #3
Charlie Stephens
Senior Member
 
Join Date: May 2010
Location: Southern California
Posts: 7,012
Default Re: 33 Ford unreliable

It should be reliable once the bugs are worked out. Have your friend join the Early Ford V8 Club in his area (https://www.earlyfordv8.org/Regional_Club_Directory.cfm) or at least attend a meeting and ask about a good place to go for mechanical work.

Charlie Stephens
Charlie Stephens is offline   Reply With Quote
Old 07-15-2018, 10:05 AM   #4
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,346
Default Re: 33 Ford unreliable

Overheating problems can be as simple as a distributor that needs to be properly adjusted to something like a cracked block that could get very expensive to repair. If your friend doesn't do repairs himself, he needs to find a flathead friendly shop that can properly diagnose and repair the problems. As others mention, the local EFV8 club members would be your best bet on finding help in that respect.
rotorwrench is offline   Reply With Quote
Old 07-15-2018, 04:43 PM   #5
Lawrie
Senior Member
 
Lawrie's Avatar
 
Join Date: May 2010
Location: Qld, Australia
Posts: 4,194
Default Re: 33 Ford unreliable

They can be made reliable,as they were when new,ours does thousands of miles ,next month we are off in it to Ayers rock,a 7500 klm trip.
still 6V and mechanical brakes,
Lawrie

Last edited by Lawrie; 07-15-2018 at 07:33 PM.
Lawrie is offline   Reply With Quote
Old 07-15-2018, 05:04 PM   #6
Tim Brown
Senior Member
 
Tim Brown's Avatar
 
Join Date: May 2010
Location: Colfax, CA
Posts: 386
Default Re: 33 Ford unreliable

Sponsored Links (Register now to hide all advertisements)
Look up East Bay Speed and Custom in Concord Ca. Brandon can do it, or connect you with someone that can...
Tim Brown is offline   Reply With Quote
Old 07-15-2018, 05:54 PM   #7
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,730
Default Re: 33 Ford unreliable

Well maybe if you could be more specific, about what is the actual problem now, we could get a better understanding of what your friend needs to do to make it more reliable. maybe a helpful mechanically savvy barner lives close by and could give the car a once-over and could pinpoint the problem. It might be something really simple.

Mart.
Mart is offline   Reply With Quote
Old 07-15-2018, 06:22 PM   #8
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,247
Default Re: 33 Ford unreliable

You might want to find someone qualified and look at everything about the car carefully. before contemplating taking it to a shop. I have found that 12 volt conversions and hydraulic brakes can be "band-aid" fixes applied by people who do not fully understand these cars and do not know how to repair them properly. I would start with the wiring harnesses, connections, and grounds along with the attendant electrical parts (coil, distributor, etc.) and make sure everything is in top shape. A hacked-up, patched together wiring harness is a prime place for electrical problems to start.

Sure, there are legitimate reasons to upgrade the systems on these cars, and most of the people (especially on here) know what they're doing and do good work. You just don't know when, why, or who on this car.
tubman is offline   Reply With Quote
Old 07-16-2018, 12:34 AM   #9
Tinker
Senior Member
 
Tinker's Avatar
 
Join Date: May 2010
Location: MN
Posts: 7,053
Default Re: 33 Ford unreliable

You're in California, the place hotrods are born. Can't you tosh a hat without hitting a place? Call Tims place given!


Try H&H for advice. Good people.

Last edited by Tinker; 07-16-2018 at 12:47 AM.
Tinker is offline   Reply With Quote
Old 07-16-2018, 10:13 AM   #10
woodiewagon46
Senior Member
 
Join Date: Jun 2012
Location: Long Island,NY
Posts: 1,551
Default Re: 33 Ford unreliable

All good advice but I would second Charlie's recommendation. There are dozens of V-8 Club Chapters in CA and most have a lot of great early Ford mechanics willing to help.
woodiewagon46 is offline   Reply With Quote
Old 07-16-2018, 12:09 PM   #11
Ron Pilger
Senior Member
 
Ron Pilger's Avatar
 
Join Date: May 2010
Location: Camrose, Alberta
Posts: 396
Default Re: 33 Ford unreliable

A full tank of 1992 fuel in the tank is going to be a significant issue. Hold of on installing the rebuilt carb until ensuring the rest of the fuel system is pristine. 99% of troubles with a 33 Ford are likely to be solved with improved 6 volt electrical components and a clean, reliable fuel system. Each of these two areas will feel a bit intimidating, at first, but remarkably simple with a "guiding light" from a veteran in your area.
Ron Pilger is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:51 PM.