The Ford Barn

RonLey · 03-22-2021, 08:48 AM

Has anyone tried to take an original ignition coil shell and put a new coil inside to maintain the original look? I was looking if split the back of the original coil or try to cut out the bottom.

Issue is that the new coil are of a diameter that they don't slide inside.

Has anybody tried to this that could provide some thoughts? I tried the search but didn't find anything.

Thanks

Ron

alexiskai · 03-22-2021, 08:50 AM

This got discussed last month:
https://www.fordbarn.com/forum/showt...4631&showall=1

RonLey · 03-22-2021, 10:25 AM

Sponsored Links (Register now to hide all advertisements)

Thank you. I didn't try restore as a search word.
Ron

03-22-2021, 08:48 AM	#1
RonLey Member Join Date: Dec 2012 Posts: 51	Take Original Coil and Place New Coil Inside Has anyone tried to take an original ignition coil shell and put a new coil inside to maintain the original look? I was looking if split the back of the original coil or try to cut out the bottom. Issue is that the new coil are of a diameter that they don't slide inside. Has anybody tried to this that could provide some thoughts? I tried the search but didn't find anything. Thanks Ron

03-22-2021, 08:50 AM	#2
alexiskai Senior Member Join Date: Apr 2018 Location: Mebane NC Posts: 2,349	Re: Take Original Coil and Place New Coil Inside This got discussed last month: https://www.fordbarn.com/forum/showt...4631&showall=1

03-22-2021, 10:25 AM	#3
RonLey Member Join Date: Dec 2012 Posts: 51	Re: Take Original Coil and Place New Coil Inside Sponsored Links (Register now to hide all advertisements) Thank you. I didn't try restore as a search word. Ron

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode