Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-27-2014, 11:49 AM   #1
mick
Senior Member
 
Join Date: Mar 2011
Posts: 111
Default 39 rolling chassis / pricing advice

Need help with pricing , a 39 rolling chassis , stuck engine , frame needs some repair , but all other components good , wheels , axles , steering . Just some ball park figures , not looking to make anything ....just find a home . Thanks !
Mick
mick is offline   Reply With Quote
Old 09-27-2014, 02:55 PM   #2
Karl Wolf
Senior Member
 
Karl Wolf's Avatar
 
Join Date: May 2010
Location: Mill Valley,Ca.
Posts: 1,509
Default Re: 39 rolling chassis / pricing advice

There are lots of variables possible...

Let's assume that all the components are well used... It takes quite a bit of time to overhaul EVERY little thing.

There are aftermarket frames available, the body is the hardest component to get.

I would figure the market for the easy to sell sought after parts, axles, steering, rear end, transmission, pedals, brakes. Then consider that a seized engine is very likely to be expensive or unlikely to fix, frames are not rare. Add that up.

Think that your market is limited to those of us who have storage.

AND, where are you located?

Karl
Karl Wolf is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-27-2014, 03:25 PM   #3
ford38v8
Senior Member
 
ford38v8's Avatar
 
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,633
Default Re: 39 rolling chassis / pricing advice

Figure $100 core value for each major component (and including clean title), add or subtract $100 for distance from major cities = $400 give or take.
__________________
Alan
ford38v8 is offline   Reply With Quote
Old 09-27-2014, 05:18 PM   #4
George/Maine
Senior Member
 
George/Maine's Avatar
 
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
Default Re: 39 rolling chassis / pricing advice

All ways keep it a secret where its at.
You may have to brake it down to sell it.
my guess $1000.
George/Maine is offline   Reply With Quote
Old 09-27-2014, 05:30 PM   #5
bart78
Senior Member
 
bart78's Avatar
 
Join Date: Jul 2011
Location: Stephenville tx
Posts: 1,019
Default Re: 39 rolling chassis / pricing advice

It would have to be in good shape for 1,000. I know it has a motor. But I would see that as a bonus if it is good. If you were going to even use it. You have to think of all the what ifs. And why not say where you are? I'm actually looking for something like this. He might be pretty close or may not be.
bart78 is offline   Reply With Quote
Old 09-27-2014, 05:52 PM   #6
ford38v8
Senior Member
 
ford38v8's Avatar
 
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,633
Default Re: 39 rolling chassis / pricing advice

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by George/Maine View Post
All ways keep it a secret where its at.
You may have to brake it down to sell it.
my guess $1000.
Nobody is fool enough to post an exact location of something. A general area is sufficient to give an idea of mileage to get there.
__________________
Alan
ford38v8 is offline   Reply With Quote
Old 09-27-2014, 06:28 PM   #7
George/Maine
Senior Member
 
George/Maine's Avatar
 
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
Default Re: 39 rolling chassis / pricing advice

Quote:
Originally Posted by ford38v8 View Post
Nobody is fool enough to post an exact location of something. A general area is sufficient to give an idea of mileage to get there.
A State would be nice.
George/Maine is offline   Reply With Quote
Old 09-27-2014, 09:08 PM   #8
flatjack9
Senior Member
 
flatjack9's Avatar
 
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,525
Default Re: 39 rolling chassis / pricing advice

What kind of repair does the frame need? I don't see it being worth $1000.
flatjack9 is online now   Reply With Quote
Old 09-28-2014, 02:31 AM   #9
Scott H in Wheaton
Senior Member
 
Scott H in Wheaton's Avatar
 
Join Date: Dec 2012
Location: Wheaton, IL near Chicago
Posts: 861
Default Re: 39 rolling chassis / pricing advice

I bought my rust free California 1938 rolling chassis for $800 no title.
Engine was stuck but sold it for $200
Scott H in Wheaton is offline   Reply With Quote
Old 09-28-2014, 04:41 AM   #10
barnfind
Senior Member
 
Join Date: Jan 2011
Posts: 426
Default Re: 39 rolling chassis / pricing advice

Somewhere between scrap value and a few thousand dollars depending on what you have and where you are located.
For instance, I would think a 39 convertible frame with title would be worth a lot more than a rusty 4 door sedan frame with no title.
barnfind is offline   Reply With Quote
Old 09-28-2014, 05:26 AM   #11
Henry Hopper
Senior Member
 
Henry Hopper's Avatar
 
Join Date: May 2010
Location: N.W.England
Posts: 439
Default Re: 39 rolling chassis / pricing advice

Mick, with the availability of the new 40 Ford coupe bodies, I guess it should be worth a decent price to someone looking to put a car together maybe.

I don't know how it works in America, but over here the vehicles identity is based on the rolling chassis and the body plays no part in it for registration purposes....the way things are headed over in this country, a rolling complete chassis will be worth plenty.
Henry Hopper is offline   Reply With Quote
Old 09-28-2014, 08:41 AM   #12
Kerk
Senior Member
 
Join Date: May 2010
Posts: 642
Smile Re: 39 rolling chassis / pricing advice

INTERESTING ! Have 36 GREAT SHAPE EXCEPT WHERE DUAL EXHAUST cut X pieces but have good X to replace damage. The right side is excellent !
Kerk is offline   Reply With Quote
Old 09-28-2014, 03:55 PM   #13
mick
Senior Member
 
Join Date: Mar 2011
Posts: 111
Default Re: 39 rolling chassis / pricing advice

I appreciate your input and advice guys . It is in pretty good shape except for the stuck engine , and the frame could be repaired . Even as parts ....there are a lot of usable components , heads , intake and ex manifolds , fan , front axle and rear end , springs , steering , 39 wheels , tranny . I'll try to post it if I can figure out how to add photos . Many thanks , Mick
mick is offline   Reply With Quote
Old 09-28-2014, 04:41 PM   #14
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,106
Default Re: 39 rolling chassis / pricing advice

With no general location, such as "the east side of Dallas", or "the western 'burbs of Chicago", it may as well be in southern Timbuktu as far as someone trying to figure the logistics of trying to purchase and retrieve something like that. You were given good advice to list it's GENERAL location. DD
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 09-28-2014, 05:32 PM   #15
George/Maine
Senior Member
 
George/Maine's Avatar
 
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
Default Re: 39 rolling chassis / pricing advice

I had a 39 rolling chassis and couldn't,t sell it as a whole unit had bad frame did get $200 for bear frame.
But all other parts had to be broken down and sold.
I went to Burlington VT street rod show last week had a nice 39 roller no trans, or engine. They were asking $2000.
George/Maine is offline   Reply With Quote
Old 09-28-2014, 05:35 PM   #16
bart78
Senior Member
 
bart78's Avatar
 
Join Date: Jul 2011
Location: Stephenville tx
Posts: 1,019
Default Re: 39 rolling chassis / pricing advice

You can ask what you want. Don't mean you will get it. This stuff might go for a lot more in other places. But not down here. I've seen a few on Craig's list. They stay there a long time.
bart78 is offline   Reply With Quote
Old 09-29-2014, 07:37 AM   #17
Cecil/WV
Senior Member
 
Cecil/WV's Avatar
 
Join Date: May 2010
Location: Gerrardstown, WV
Posts: 2,265
Default Re: 39 rolling chassis / pricing advice

A friend of mine is advertising a complete 1950 rolling chassis with a tired, but running, engine for $2500.00 in MD.
Cecil/WV is offline   Reply With Quote
Old 10-08-2014, 10:58 PM   #18
lonewolf
Senior Member
 
Join Date: May 2010
Location: Michigan
Posts: 464
Default Re: 39 rolling chassis / pricing advice

If the trans has th late 39 synchros and looks good inside ots worth 3-500 buy its self with the shifter
lonewolf is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:28 PM.