Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-18-2019, 03:10 PM   #1
svmsr1044
Senior Member
 
Join Date: Nov 2011
Location: Ivyland, PA
Posts: 116
Default Carb Question

I disassembled my Holley 94 carb and I noticed that the Pump Discharge Nozzle has a ball at the end of one nozzle and not at the end of the other nozzle. Is this normal?? thanks in advance
svmsr1044 is offline   Reply With Quote
Old 10-18-2019, 03:20 PM   #2
flatjack9
Senior Member
 
flatjack9's Avatar
 
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,516
Default Re: Carb Question

Accelerator pump? There is one ball below the nozzle assembly.
flatjack9 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-18-2019, 03:23 PM   #3
svmsr1044
Senior Member
 
Join Date: Nov 2011
Location: Ivyland, PA
Posts: 116
Default Re: Carb Question

No, the "pump discharge nozzle", shaped like a "Y"
svmsr1044 is offline   Reply With Quote
Old 10-18-2019, 04:59 PM   #4
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,725
Default Re: Carb Question

That ball appearing end of the pump nozzle may be just a cap to close the end of the nozzle. The nozzle bars are on both sides of the pump discharge nozzle.

Last edited by Terry,OH; 10-18-2019 at 05:09 PM.
Terry,OH is offline   Reply With Quote
Old 10-18-2019, 05:54 PM   #5
scicala
Senior Member
 
scicala's Avatar
 
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,697
Default Re: Carb Question

Like Terry,OH said, it's probably just a different plug on one side. The nozzle holes are drilled on a downward angle before the end plugs. As long as it squirts out of both holes and not out the end plugs, it's good.



Sal
scicala is offline   Reply With Quote
Old 10-18-2019, 06:05 PM   #6
Fairview
Member
 
Join Date: Dec 2010
Location: Waynesboro, Virginia
Posts: 67
Default Re: Carb Question

Sponsored Links (Register now to hide all advertisements)
Do these pictures help?
Attached Images
File Type: jpg 5BB42E42-CDE5-4688-B728-8D19634B42BD.jpg (38.2 KB, 67 views)
File Type: jpg 5E46569E-D7F3-4AF1-AFE6-C27785B2C0FB.jpg (25.3 KB, 68 views)
Fairview is offline   Reply With Quote
Old 10-18-2019, 06:08 PM   #7
scicala
Senior Member
 
scicala's Avatar
 
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,697
Default Re: Carb Question

That's what I'm used to seeing. The end caps are small recessed caps. I guess it's possible someone plugged one with a ball on one side.


Sal
scicala is offline   Reply With Quote
Old 10-18-2019, 08:00 PM   #8
svmsr1044
Senior Member
 
Join Date: Nov 2011
Location: Ivyland, PA
Posts: 116
Default Re: Carb Question

That makes sense, I’ll bet that’s exactly what happened.
Thanks all
Steve
svmsr1044 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:55 AM.