The Ford Barn

Standing Elk · 11-03-2017, 08:34 PM

When filling the shocks on an A what is the procedure? Do you fill to the top of the fill hole and does the shock arm need to be all the way up or down or in any other particular position? Thanks

Gary WA · 11-03-2017, 09:00 PM

Sponsored Links (Register now to hide all advertisements)

Hold shock horizontal and fill the inner cavity completely with fluid.,Once you have completely installed cover in the proper position,seals etc.Lastly,snug the steel lock ring up against the O-ring,if you have completely rebuilt the shock, otherwise, just remove filler plug and fill! arm position dosen't matter.

11-03-2017, 08:34 PM	#1
Standing Elk Senior Member Join Date: Aug 2017 Location: St. Maries, Idaho Posts: 162	shock oil When filling the shocks on an A what is the procedure? Do you fill to the top of the fill hole and does the shock arm need to be all the way up or down or in any other particular position? Thanks

11-03-2017, 09:00 PM	#2
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,107	Re: shock oil Sponsored Links (Register now to hide all advertisements) Hold shock horizontal and fill the inner cavity completely with fluid.,Once you have completely installed cover in the proper position,seals etc.Lastly,snug the steel lock ring up against the O-ring,if you have completely rebuilt the shock, otherwise, just remove filler plug and fill! arm position dosen't matter. __________________ www.whidbeymodelaclub.com