The Ford Barn

Ziffer · 06-30-2010, 06:24 PM

I am looking for the ends of the wishbone that go to the axle. I've got a real nice 33-34 wishbone and ball end but need your help locating a reasonable set of axle ends.
Thanks
rp

Turner · 06-30-2010, 08:29 PM

If you don’t have any luck finding a wishbone, consider me a “last resort.” I have a wishbone from a 33 Model B pickup (same as V8??) where the ball was cut off with a torch. What’s left is still attached to a complete front end, but I don’t know when I would be in position to disassemble. Lee

Andy · 07-01-2010, 11:25 AM

Sponsored Links (Register now to hide all advertisements)

I have one only. $10. Use it for a pattern and make the other ? I have made some hot rod ones from plate and Model A sockets.

06-30-2010, 06:24 PM	#1
Ziffer Senior Member Join Date: May 2010 Location: Michigan Posts: 171	Wanted 32-34 axle ends for wishbone City: DeWitt State: MI I am looking for the ends of the wishbone that go to the axle. I've got a real nice 33-34 wishbone and ball end but need your help locating a reasonable set of axle ends. Thanks rp

06-30-2010, 08:29 PM	#2
Turner Junior Member Join Date: Jun 2010 Location: Mechanicsville, VA Posts: 17	Re: Wanted 32-34 axle ends for wishbone If you don’t have any luck finding a wishbone, consider me a “last resort.” I have a wishbone from a 33 Model B pickup (same as V8??) where the ball was cut off with a torch. What’s left is still attached to a complete front end, but I don’t know when I would be in position to disassemble. Lee

07-01-2010, 11:25 AM	#3
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,770	Re: Wanted 32-34 axle ends for wishbone Sponsored Links (Register now to hide all advertisements) I have one only. $10. Use it for a pattern and make the other ? I have made some hot rod ones from plate and Model A sockets.