|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
04-01-2014, 05:05 PM | #1 |
Senior Member
Join Date: May 2012
Posts: 240
|
Lead Additive To Fuel
Anyone use it in a flathead - anyone know anything about it ?
Where I am located we only have Leadfree Gas. |
04-01-2014, 05:18 PM | #2 |
Member
Join Date: Oct 2013
Posts: 86
|
Re: Lead Additive To Fuel
I believe all fuel today is lead free. Has been since the late 70's. Lead was used as a lubricant, as well as forming a seal for the valves in early engines. Todays engines have hardened valves and valve seats so no longer need the lead in the fuel. If your motor has been rebuilt over the past 20 years or so, odds are it has hardened valves and guides. Correct me if Im wrong, but that is how I understand the need for leaded fuel years ago. I generally just use Marvel Mystry oil in my gas tank as an additive to sooth the valve train.
Last edited by Tudorp; 04-01-2014 at 05:34 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
04-01-2014, 05:50 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Lead Additive To Fuel
What year flathead do you have?
|
04-01-2014, 05:56 PM | #4 |
Senior Member
Join Date: Jul 2012
Posts: 586
|
Re: Lead Additive To Fuel
As I understand the lead issue flatjack9 has the right question to ask. Engines earlier than 8bas do not need lead. Due to poor quality of gas they had hardened seats, which I believe are only needed on the exhaust valves.
|
04-01-2014, 06:47 PM | #5 |
Senior Member
Join Date: May 2010
Location: Woodville Ontario
Posts: 227
|
Re: Lead Additive To Fuel
been running unleaded gas in my 8ba for 75000 miles without hardened seats. no problems
|
04-01-2014, 06:54 PM | #6 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,408
|
Re: Lead Additive To Fuel
Sponsored Links (Register now to hide all advertisements)
Quote:
I have experimented with many fuels and additives over the years. Tetraethyl lead was introduced in the 30's as an octane booster/antiknock compound. It was beneficial as a valve stem lubricant also. IT IS EXTREMELY TOXIC! It is not something a back yard Joe Mechanic should be playing with. It can still be found in 100LL aviation gas in amounts of 4 cc per gallon. This is the highest quality gas available to the public these days although you have to buy it in cans or barrels unless you are pumping it into a plane. |
|
04-01-2014, 10:55 PM | #7 |
Senior Member
Join Date: Oct 2010
Location: Orem, Utah
Posts: 5,762
|
Re: Lead Additive To Fuel
I still put CD2 lead substitute in my gas . . . just in case it helps.
__________________
Prof. Henry (The Roaming Gnome) "It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness |
04-02-2014, 12:00 AM | #8 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,644
|
Re: Lead Additive To Fuel
Old Henry, "Just in case it helps" is the best and most popular reason given for using an additive! Congratiulations for being right on top of that one!
Actually, the additive you chose is very helpful for one troublesome problem we all seem to have at one time or another: Using additives in your gas has a beneficial effect on your wallet in keeping it trim and fit, which translates to no ugly bulging around the hip pocket.
__________________
Alan |
04-02-2014, 09:04 AM | #9 |
Senior Member
Join Date: May 2010
Location: Salado, TX.
Posts: 733
|
Re: Lead Additive To Fuel
As Pete mentioned, the primary purpose of tetraethyl lead was to control knock by altering the rate of burn of the fuel molecules.
The notion of the lead as a "lubricant" is pretty much fictional, or to be more charitable a misinterpretation. The former Union Oil Co. did exhaustive (pun intended) analysis and produced an SAE paper defining the unintended positive outcome for exhaust valve life, as did others. The lead additive was disolved in solution, that's why you never had lead balls or film at the bottom of your tank. In the combustion process the lead became oxidized and it was a portion of that lead oxide that "plated out" on the exhaust valve (obviously wouldn't affect intake because it was still in solution when it went past that) and seat on it's way out. As those of you who are familiar with welding have learned, it's difficult to weld dirty (as well as dissimilar) metals. Because of the high heat (under certain extreme operating conditions) the exhaust valve endured it would form microscopic welds from valve face to seat that were broken as the valve opened. Over time those breaks accumulated to be recognized as valve/seat erosion. The lead oxide had the effect of dirtying the valve/seat interface preventing welding.
__________________
Luck occurs when preparation and opportunity converge. |
04-02-2014, 09:53 AM | #10 |
Senior Member
Join Date: May 2010
Location: Millersport, central ohio
Posts: 668
|
Re: Lead Additive To Fuel
Very good explanation Uncle Bob. The stuff they call lead substitute such as" Insted of Lead, SD2 and many others have absolutly no relation to Tetraethyl lead and will eventually cause a kind of gel in the bottom of sediment and or float bowl. The stuff does benifit one group, the ones manufacturing and selling the crap.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|