The Ford Barn

F-150 guy · 12-15-2021, 12:28 PM

My daughters '94 F150 E4OD trans control lever the cover on the end of the lever has came loose and slides off as far as the OD on/off control wires allow it to. Is it OK to gorilla glue it back or will that make it difficult to repair/replace the OD switch if repair/replacement become necesary?

1942deluxe · 12-15-2021, 03:03 PM

The cap is fairly inexpensive and was still a good number from Ford as far as I know.
Part number should be F2UZ-7A241-CA. The little plastic tabs break on them. Sold
quite a few thru the years...

KULTULZ · 12-15-2021, 05:05 PM

Try Here - https://www.amazon.com/Ford-F2UZ-7A2.../dp/B000O0JQSS

EDIT- Slurred URL Corrected

F-150 guy · 12-16-2021, 12:39 PM

Thank you fellows for your replies. One more question. How does one disconnect the wires to the OD switch and reconnect/reinstall the switch on the new part and fasten it on the lever? I have AMD and cannot see details very well/ Thank you.

KULTULZ · 12-16-2021, 08:22 PM

See if this description helps - https://www.fixya.com/cars/t26256583...4_f150_regular

The actual SW connects to a harness end connector . The replacement bezel should snap on at the end of the shift lever.

If not get back.

paul2748 · 12-16-2021, 08:37 PM

Sponsored Links (Register now to hide all advertisements)

Doesn't work

Quote:

Originally Posted by KULTULZ

Try Here - https://www.amazon.com/Ford-F2UZ-7A214-CA-Regular- F2UZ-7A214-CA - CAP-HANDLE/dp/B000O0JQSS

KULTULZ · 12-17-2021, 01:55 AM

Quote:

Originally Posted by paul2748

Doesn't work

Slurring my URLS again ...

https://www.amazon.com/Ford-F2UZ-7A2.../dp/B000O0JQSS

F-150 guy · 12-26-2021, 10:54 PM

Thanks guys for the replies and advice. Her husband took care of the problem. He's not much in to working on vehicles so that kinda surprised me.

12-15-2021, 12:28 PM	#1
F-150 guy Junior Member Join Date: Feb 2021 Posts: 26	'94 F150 E4OD trans control lever My daughters '94 F150 E4OD trans control lever the cover on the end of the lever has came loose and slides off as far as the OD on/off control wires allow it to. Is it OK to gorilla glue it back or will that make it difficult to repair/replace the OD switch if repair/replacement become necesary?

12-15-2021, 03:03 PM	#2
1942deluxe Senior Member Join Date: Jan 2011 Location: Albion, PA Posts: 713	Re: '94 F150 E4OD trans control lever The cap is fairly inexpensive and was still a good number from Ford as far as I know. Part number should be F2UZ-7A241-CA. The little plastic tabs break on them. Sold quite a few thru the years... Last edited by 1942deluxe; 12-15-2021 at 03:08 PM. Reason: more information

12-15-2021, 05:05 PM	#3
KULTULZ Senior Member Join Date: Aug 2012 Location: IN A 'GALAXIE' FAR FAR AWAY Posts: 6,475	Re: '94 F150 E4OD trans control lever Try Here - https://www.amazon.com/Ford-F2UZ-7A2.../dp/B000O0JQSS EDIT- Slurred URL Corrected __________________ *** - WHY IS IT ... - ... that everything you buy in the grocery store is either wrapped in or contained in plastic but the government doesn't want you to carry it out in a plastic bag? WONDERING IN W(BY GOD)V ... DIAGNOSED CDO** - (OCD In Correct Alphabetical Order) Last edited by KULTULZ; 12-17-2021 at 01:59 AM.

12-16-2021, 12:39 PM	#4
F-150 guy Junior Member Join Date: Feb 2021 Posts: 26	Re: '94 F150 E4OD trans control lever Thank you fellows for your replies. One more question. How does one disconnect the wires to the OD switch and reconnect/reinstall the switch on the new part and fasten it on the lever? I have AMD and cannot see details very well/ Thank you.

12-26-2021, 10:54 PM	#8
F-150 guy Junior Member Join Date: Feb 2021 Posts: 26	Re: '94 F150 E4OD trans control lever Thanks guys for the replies and advice. Her husband took care of the problem. He's not much in to working on vehicles so that kinda surprised me.