|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-11-2013, 08:42 PM | #1 |
Member
Join Date: Nov 2011
Location: Wilmington New York
Posts: 94
|
Generator pulley
I want to post a wanted ad for a generator pulley.Are all not threaded 5/8 belt width pulleys the same.If not what years would I be looking for.I have a generator with a narrow pulley held on with the nut and lockwasher and want to replace it with a wide pulley.
Thanks in advance Bill |
08-11-2013, 09:09 PM | #2 |
Senior Member
Join Date: Jun 2010
Location: Perry OH
Posts: 1,327
|
Re: Generator pulley
You need a 8BA pulley. Jim.T.
Last edited by jimvette59; 08-12-2013 at 03:59 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
08-12-2013, 01:10 PM | #3 |
Senior Member
Join Date: May 2010
Location: near Washington, DC
Posts: 558
|
Re: Generator pulley
Just to amplify what jimvette said: You have a narrow belt pulley. They only came on the 50-53 passenger flatheads. Assuming the one you have fits your armature shaft properly, then you need a 49 passenger or 48-53 commercial/truck pulley which is wide belt. All these are held on with a Woodruff key, lockwasher and nut.
__________________
Those who do not move do not die, but are they not already dead? |
08-12-2013, 08:18 PM | #4 |
Member
Join Date: Nov 2011
Location: Wilmington New York
Posts: 94
|
Re: Generator pulley
Sponsored Links (Register now to hide all advertisements)
Bill |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|