Brake line clips

[Model A Bill]

Does anyone have pictures or available sources for the brake line mounting clips that would have held the brake lines going to the front along the frame and crossmember and down the radius rods to the rear.I'm not looking for a particular year(maybe there all the same) as long as they are early ford

Thanks
Bill

[19Fordy]

Here's a few on a 40 Ford. I am sure someone will know of a source. I will remove one of the clips and take photos of it with dimensions so you can make some, if you so desire.
Just send me a PM.

[Ralph Moore]

I bought some stainless ones from Speedway, they work great, and I guess if you wanted them to look stock you could just paint them

[Model A Bill]

Thanks for the pics and the info.I found some at McMaster Carr which should work just fine.Me and Speedway Motors don't get along to well anymore

Thanks again
Bill

[Walt Dupont--Me.]

Originally Posted by Model A Bill

Thanks for the pics and the info.I found some at McMaster Carr which should work just fine.Me and Speedway Motors don't get along to well anymore

Thanks again
Bill

What you need Bill is a beautifull flathead with Edelbrock Block Ietter heads and a Eddie Meyer intake with the tall runners. to go with those pipe clips. Walt

[Model A Bill]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Walt Dupont--Me.

What you need Bill is a beautifull flathead with Edelbrock Block Ietter heads and a Eddie Meyer intake with the tall runners. to go with those pipe clips. Walt

Don't be teasing now Walt

[Lawson Cox]

Originally Posted by Model A Bill

Does anyone have pictures or available sources for the brake line mounting clips that would have held the brake lines going to the front along the frame and crossmember and down the radius rods to the rear.I'm not looking for a particular year(maybe there all the same) as long as they are early ford

Thanks
Bill

I am sure Roy Nacewicz has them.