|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-28-2020, 04:50 PM | #1 |
Member
Join Date: Apr 2014
Posts: 84
|
Brake drum with shim
I got my brakes back from Randy Gross which were like new.. Beautiful Job
the driver side rear drum was hitting the backing plate so Randy sent some shims. I put one in and now the drum does not go all the way in. there is a gap between the drum and backing plate. Any advise would be great.. I am going to pull off the drum tomorrow and try without shim to see if it is still rubbing. If it is still rubbing ? Thanks George |
|
|
Sponsored Links (Register now to hide all advertisements) |
|